request mpls lsp adjust-autobandwidth



request mpls lsp adjust-autobandwidth 
<logical-system (all | logical-system-name)>
<lsp-name>

Command introduced before JUNOS Release 7.4.

Manually trigger a bandwidth allocation adjustment for active label-switched paths (LSPs).

none — Manually trigger a bandwidth allocation adjustment for all active LSP paths on all logical systems.

logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.

lsp-name — (Optional) Manually trigger a bandwidth allocation adjustment on the specified LSP only.

For this command to work properly, the following conditions must exist:

Automatic bandwidth allocation must be enabled on the LSP. The parameters for adjustment interval and maximum average bandwidth are not reset after you issue the request mpls lsp adjust-autobandwidth command.
The difference between the adjusted bandwidth and the current LSP path bandwidth must be greater than the threshold limit.

maintenance

When you enter this command, you are provided feedback on the status of your request.

user@host> request mpls lsp adjust-auto-bandwidth