BGP Operational Mode Commands

[Contents] [Prev] [Next] [Index] [Report an Error]

Table 9 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot the Border Gateway Protocol (BGP). Commands are listed in alphabetical order.

Table 9: BGP Operational Mode Commands

Task	Command
Remove damping information.	clear bgp damping
Remove entries from the neighbor database.	clear bgp neighbor
Request BGP to refresh routes.	clear bgp table
Display entries in the BGP group database.	show bgp group
Display traffic statistics for BGP groups.	show bgp group traffic-statistics
Display entries in the BGP neighbor database.	show bgp neighbor
Display BGP summary information.	show bgp summary
Display BGP damping parameters.	show policy damping

Note: For more BGP-related commands, such as show route protocol, show route instance, and show route table, see Protocol-Independent Routing Operational Mode Commands.

Note: For information about how to configure BGP, see the JUNOS Routing Protocols Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]