BFD Operational Mode Commands

[Contents] [Prev] [Next] [Index] [Report an Error]

Table 7 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot Bidirectional Forwarding Detection (BFD) sessions. Commands are listed in alphabetical order.

Table 7: BFD Operational Mode Commands

Task	Command
Clear BFD parameters.	clear bfd adaptation
Clear BFD sessions.	clear bfd session
Display BFD session statistics.	show bfd session

Note: The protocol client for which the BFD session is active can be either IS-IS or OSPF.

Note: For information about how to configure BFD, see the JUNOS Routing Protocols Configuration Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]