[Contents] [Prev] [Next] [Index] [Report an Error]

show ppp summary

Syntax



show ppp summary

Release Information

Command introduced in JUNOS Release 7.5.

Description

Display PPP session summary information.

Options

This command has no options.

Required Privilege Level

view

List of Sample Output

show ppp summary

Output Fields

Table 62 lists the output fields for the show ppp summary command. Output fields are listed in the approximate order in which they appear.

Table 62: show ppp summary Output Fields

Field Name	Field Description
Interface	Interface on which the PPP session is running.
Session type	Type of session: PPP or Cisco-HDLC.
Session phase	PPP process phases: Authenticate, Pending, Establish, Network, Disabled.
Session flags	Special conditions present in the session, such as Bundled, TCC, No-keepalives, Looped, Monitored, and NCP-only.

show ppp summary

user@host> show ppp summary

Interface      Session type  Session phase      Session flags
at-4/0/0.456   PPP           Network
lsq-0/3/0.0    PPP           Disabled 
lsq-1/0/0.0    PPP           Disabled 
rlsq0.0        PPP           Network            NCP-only 
so-1/0/0.0     PPP           Authenticate
so-1/0/1.0     PPP           Disabled           Looped
so-2/0/0.0     Cisco-HDLC    Establish
so-4/0/0.0     PPP           Establish          Monitored
t1-1/3/0:1.0   PPP           Network            Bundled 
t1-1/3/0:2.0   PPP           Network            Bundled

[Contents] [Prev] [Next] [Index] [Report an Error]