[Contents] [Prev] [Next] [Index] [Report an Error]

show isdn status

Syntax



show isdn status
<brief | detail>
<br-pim/0/port>

Release Information

Command introduced before JUNOS Release 7.4.

Description

(J-series routing platform only) Display ISDN status information.

Options

none — Display standard ISDN status information for all Basic Rate Interface (BRI) interfaces.

brief | detail — (Optional) Display the specified level of output.

br-pim/0/port — (Optional) Display status information for the specified BRI interface only.

Required Privilege Level

view

List of Sample Output

show isdn status

Output Fields

Table 97 lists the output fields for the show isdn status command. Output fields are listed in the approximate order in which they appear.

Table 97: show isdn status Output Fields

Field Name	Field Description
Interface	ISDN BRI interface name.
Layer 1 status	Layer 1 status: active or inactive.
Layer 2 status	Layer 2 status: CES—Common endpoint suffix value. Q.921—Q.921 status: up or down. TEI—Assigned terminal endpoint identifier (TEI) number.
Layer 3 status	Number of active calls, plus: Switch Type—Type of ISDN switch based on the manufacturer. Interface Type—Information relating to a local or network interface. Calling number—Telephone number configured as the primary dialing number. T310—Q.931-specific timer value. Tei Option—Initial connectivity configuration of the ISDN interface.

show isdn status

user@host> show isdn status

Interface: br-4/0/0 
 Layer 1 status: active
 Layer 2 status: 
  CES: 0, Q.921: up, TEI: 64
 Layer 3 status: 1 Active calls
  Switch Type           : ATT5E
  Interface Type        : USER
  Calling number        : 5551212
  T310                  : 10 seconds
  Tei Option            : Power Up

[Contents] [Prev] [Next] [Index] [Report an Error]