[Contents] [Prev] [Next] [Index] [Report an Error]

show interfaces (Virtual Loopback Tunnel)

Syntax

show interfaces vt-fpc/pic/port
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display status information about the specified virtual loopback tunnel interface.

Options

vt-fpc/pic/port — Display standard information about the specified virtual loopback tunnel interface.

brief | detail | extensive | terse — (Optional) Display the specified level of output.

descriptions — (Optional) Display interface description strings.

media — (Optional) Display media-specific information about network interfaces.

snmp-index snmp-index — (Optional) Display information for the specified SNMP index of the interface.

statistics — (Optional) Display static interface statistics.

Required Privilege Level

view

List of Sample Output

show interfaces (Virtual Loopback Tunnel)
show interfaces brief (Virtual Loopback Tunnel)
show interfaces detail (Virtual Loopback Tunnel)
show interfaces extensive (Virtual Loopback Tunnel)

Output Fields

Table 132 lists the output fields for the show interfaces (virtual loopback tunnel) command. Output fields are listed in the approximate order in which they appear.

Table 132: Virtual Loopback Tunnel show interfaces Output Fields

Field Name

Field Description

Level of Output
Physical Interface 

Physical interface

Name of the physical interface.

All levels

Enabled

State of the interface. Possible values are described in Enabled Field.

All levels

Interface index

Physical interface's index number, which reflects its initialization sequence.

detail extensive none

SNMP ifIndex

SNMP index number for the physical interface.

detail extensive none

Generation

Unique number for use by Juniper Networks technical support only.

detail extensive

Type

Type of interface.

All levels

Link-level type

Encapsulation used on the physical interface.

All levels

MTU

MTU size on the physical interface.

All levels

Speed

Speed at which the interface is running.

All levels

Hold-times

Current interface hold-time up and hold-time down, in milliseconds.

detail extensive

Device flags

Information about the physical device. Possible values are described in Device Flags.

All levels

Input Rate

Input rate in bits per second (bps) and packets per second (pps).

None specified

Output Rate

Output rate in bps and pps.

None specified

Statistics last cleared

Time when the statistics for the interface were last set to zero.

detail extensive

Traffic statistics

Number and rate of bytes and packets received and transmitted on the physical interface.

  • Input bytes, Output bytes—Number of bytes received and transmitted on the interface.
  • Input packets, Output packets—Number of packets received and transmitted on the interface.

detail extensive

Logical Interface 

Logical interface

Name of the logical interface

All levels

Index

Logical interface index number, which reflects its initialization sequence.

detail extensive none

SNMP ifIndex

Logical interface SNMP interface index number.

detail extensive none

Generation

Unique number for use by Juniper Networks technical support only.

detail extensive

Flags

Information about the logical interface. Possible values are described in Logical Interface Flags.

All levels

Encapsulation

Encapsulation on the logical interface.

All levels

Input packets

Number of packets received on the logical interface.

None specified

Output packets

Number of packets transmitted on the logical interface.

None specified

Bandwidth

Bandwidth allotted to the logical interface, in kilobytes per second.

All levels

Traffic statistics

Total number of bytes and packets received and transmitted on the logical interface. These statistics are the sum of the local and transit statistics. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize.

  • Input bytes—Number of bytes received on the interface.
  • Output bytes—Number of bytes transmitted on the interface.
  • Input packets—Number of packets received on the interface.
  • Output packets—Number of packets transmitted on the interface.

detail extensive

Transit statistics

Statistics for traffic transiting the router. When a burst of traffic is received, the value in the output packet rate field might briefly exceed the peak cell rate. It takes awhile (generally, less than 1 second) for this counter to stabilize.

detail extensive

protocol-family

Protocol family configured on the logical interface. Possible values are described in Family Flags.

brief

Protocol

Protocol family configured on the logical interface. Possible values are described in Family Flags.

detail extensive none

MTU

Maximum transmission unit size on the logical interface.

detail extensive none

Generation

Unique number for use by Juniper Networks technical support only.

detail extensive

Route Table

Routing table in which the logical interface address is located. For example, 0 refers to the routing table inet.0.

detail extensive

Flags

Information about protocol family flags. Possible values are described in Family Flags.

detail extensive none

show interfaces (Virtual Loopback Tunnel)

user@host> show interfaces vt-1/2/0 
Physical interface: vt-1/2/0, Enabled, Physical link is Up
  Interface index: 144, SNMP ifIndex: 40
  Type: Loopback, Link-level type: Virtual-loopback-tunnel, MTU: Unlimited,
  Speed: 800mbps
  Device flags   : Present Running
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)

  Logical interface vt-1/2/0.0 (Index 76) (SNMP ifIndex 57)
    Flags: Point-To-Point 16384 Encapsulation: Virtual-loopback-tunnel
  Input packets : 0
  Output packets: 0
    Protocol inet, MTU: Unlimited
      Flags: None
    Protocol mpls, MTU: Unlimited
      Flags: None

show interfaces brief (Virtual Loopback Tunnel)

user@host> show interfaces vt-1/2/0 brief 
Physical interface: vt-1/2/0, Enabled, Physical link is Up
  Type: Loopback, Link-level type: Virtual-loopback-tunnel, MTU: Unlimited,
  Speed: 800mbps
  Device flags   : Present Running

  Logical interface vt-1/2/0.0
    Flags: Point-To-Point 16384 Encapsulation: Virtual-loopback-tunnel
    inet
    mpls

show interfaces detail (Virtual Loopback Tunnel)

user@host> show interfaces vt-1/2/0 detail 
Physical interface: vt-1/2/0, Enabled, Physical link is Up
  Interface index: 144, SNMP ifIndex: 40, Generation: 27
  Type: Loopback, Link-level type: Virtual-loopback-tunnel, MTU: Unlimited,
  Speed: 800mbps
  Hold-times     : Up 0 ms, Down 0 ms
  Device flags   : Present Running
  Statistics last cleared: Never
  Traffic statistics:
   Input  bytes  :                    0                    0 bps
   Output bytes  :                    0                    0 bps
   Input  packets:                    0                    0 pps
   Output packets:                    0                    0 pps

  Logical interface vt-1/2/0.0 (Index 76) (SNMP ifIndex 57) (Generation 17)
    Flags: Point-To-Point 16384 Encapsulation: Virtual-loopback-tunnel
    Traffic statistics:
     Input  bytes  :                    0
     Output bytes  :                    0
     Input  packets:                    0
     Output packets:                    0
    Transit statistics:
     Input  bytes  :                    0                    0 bps
     Output bytes  :                    0                    0 bps
     Input  packets:                    0                    0 pps
     Output packets:                    0                    0 pps
    Protocol inet, MTU: Unlimited, Generation: 33, Route table: 0
      Flags: None
    Protocol mpls, MTU: Unlimited, Generation: 34, Route table: 0
      Flags: None

show interfaces extensive (Virtual Loopback Tunnel)

user@host> show interfaces vt-1/2/0 extensive 
Physical interface: vt-1/2/0, Enabled, Physical link is Up
  Interface index: 144, SNMP ifIndex: 40, Generation: 27
  Type: Loopback, Link-level type: Virtual-loopback-tunnel, MTU: Unlimited,
  Speed: 800mbps
  Hold-times     : Up 0 ms, Down 0 ms
  Device flags   : Present Running
  Statistics last cleared: Never
  Traffic statistics:
   Input  bytes  :                    0                    0 bps
   Output bytes  :                    0                    0 bps
   Input  packets:                    0                    0 pps
   Output packets:                    0                    0 pps

  Logical interface vt-1/2/0.0 (Index 76) (SNMP ifIndex 57) (Generation 17)
    Flags: Point-To-Point 16384 Encapsulation: Virtual-loopback-tunnel
    Traffic statistics:
     Input  bytes  :                    0
     Output bytes  :                    0
     Input  packets:                    0
     Output packets:                    0
    Transit statistics:
     Input  bytes  :                    0                    0 bps
     Output bytes  :                    0                    0 bps
     Input  packets:                    0                    0 pps
     Output packets:                    0                    0 pps
    Protocol inet, MTU: Unlimited, Generation: 33, Route table: 0
      Flags: None
    Protocol mpls, MTU: Unlimited, Generation: 34, Route table: 0
      Flags: None
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.