- show interfaces source-class
- (all | destination-class-name logical-interface-name)
Command introduced before JUNOS Release 7.4.
all option introduced in JUNOS Release 8.0.
Display information about interfaces grouped by source class.
all — Display information about all configured source classes.
source-class-name — Name of a logical grouping of prefixes that count packets having the source address matching those prefixes.
interface-name — Name of a logical interface.
For interfaces that carry IPv4, IPv6, or Multiprotocol Label Switching (MPLS) traffic, you can maintain packet counts based on the entry and exit points for traffic passing through your network. Entry and exit points are identified by source and destination prefixes grouped into sets defined as source classes and destination classes. For more information, see the JUNOS Network Interfaces Configuration Guide.
view
Table 25 lists the output fields for the show interfaces source-class command. Output fields are listed in the approximate order in which they appear.
Table 25: show interfaces source-class Output Fields
user@host> show interfaces source-class all
Logical interface so-0/1/0.0
Packets Bytes
Source class (packet-per-second) (bits-per-second)
gold 1928095 161959980
( 889) ( 597762)
bronze 0 0
( 0) ( 0)
silver 0 0
( 0) ( 0)
Logical interface so-0/1/3.0
Packets Bytes
Source class (packet-per-second) (bits-per-second)
gold 0 0
( 0) ( 0)
bronze 0 0
( 0) ( 0)
silver 116113 9753492
( 939) ( 631616)