show interfaces snmp-index

Syntax

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display information for the interface with the specified SNMP index.

Options

This command has no options.

Additional Information

Output from both the show interfaces interface-name detail and the show interfaces interface-name extensive command includes all the information displayed in the output from the show interfaces snmp-index command.

Required Privilege Level

view

List of Sample Output

Output Fields

The output fields from the show interfaces snmp-index snmp-index command are identical to those produced by the show interfaces interface-name command. For a description of output fields, see the other chapters in this manual.

Physical interface: so-2/1/1, Enabled, Physical link is Down
  Interface index: 149, SNMP ifIndex: 33
  Link-level type: PPP, MTU: 4474, Clocking: Internal, SONET mode, Speed: OC48,   Loopback: None, FCS: 16, Payload scrambler: Enabled
  Device flags   : Present Running Down
  Interface flags: Hardware-Down Point-To-Point SNMP-Traps 16384
  Link flags     : Keepalives
  CoS queues     : 8 supported
  Last flapped   : 2005-06-15 11:45:57 PDT (05:38:43 ago)
  Input rate     : 0 bps (0 pps)
  Output rate    : 0 bps (0 pps)
  SONET alarms   : LOL, PLL, LOS
  SONET defects  : LOL, PLL, LOF, LOS, SEF, AIS-L, AIS-P

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.