 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
- show interfaces rlsqnumber
- <brief | detail | extensive | terse>
- <descriptions>
- <media>
- <queue>
- <routing>
- <snmp-index snmp-index>
- <statistics>
Command introduced in JUNOS Release 7.6.
(M-series and T-series routing platforms only) Display status information about the specified redundant link services intelligent queuing (IQ) configuration.
rlsqnumber — Redundant link services IQ interface name. The logical interface number range of values is 0 through 127.
none — Display standard status information about the specified redundant link services IQ configuration.
brief | detail | extensive | terse — (Optional) Display the specified level of output.
descriptions — (Optional) Display interface description strings.
media — (Optional) Display media-specific information about network interfaces.
queue — (Optional) Display queue information about network interfaces.
routing — (Optional) Display routing information about network interfaces.
snmp-index snmp-index — (Optional) Display information for the specified SNMP index of the interface.
statistics — (Optional) Display static interface statistics.
view
Table 124 lists the output fields for the show interfaces (redundant link services IQ) command. Output fields are listed in the approximate order in which they appear.
user@host> show interfaces rlsq0
Physical interface: rlsq0, Enabled, Physical link is Up
Interface index: 196, SNMP ifIndex: 27
Link-level type: LinkService, MTU: 1504
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
Last flapped : Never
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
Logical interface rlsq0.0 (Index 72) (SNMP ifIndex 88)
Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: Multilink-PPP
Bandwidth: 0
Statistics Frames fps Bytes bps
Bundle:
Fragments:
Input : 3 0 255 0
Output: 3 0 264 0
Packets:
Input : 3 0 252 0
Output: 0 0 0 0
Link:
t1-1/3/0:1.0
Input : 3 0 255 0
Output: 0 0 0 0
t1-1/3/0:2.0
Input : 0 0 0 0
Output: 3 0 264 0
NCP state: inet: Opened, inet6: Not-configured, iso: Not-configured,
mpls: Not-configured
Protocol inet, MTU: 1500
Flags: None
Addresses, Flags: Is-Preferred Is-Primary
Destination: 2.2.2.0/30, Local: 2.2.2.1
user@host> show interfaces rlsq0 brief
Physical interface: rlsq0, Enabled, Physical link is Up
Link-level type: LinkService, MTU: 1504
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
Logical interface rlsq0.0
Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: Multilink-PPP
inet 2.2.2.1/30
user@host> show interfaces rlsq0 detail
Physical interface: rlsq0, Enabled, Physical link is Up
Interface index: 196, SNMP ifIndex: 27, Generation: 144
Link-level type: LinkService, MTU: 1504
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
Last flapped : Never
Statistics last cleared: Never
Traffic statistics:
Input bytes : 252 0 bps
Output bytes : 276 0 bps
Input packets: 3 0 pps
Output packets: 3 0 pps
Frame exceptions:
Oversized frames 0
Errored input frames 0
Input on disabled link/bundle 0
Output for disabled link/bundle 0
Queuing drops 0
Buffering exceptions:
Packet data buffer overflow 0
Fragment data buffer overflow 0
Assembly exceptions:
Fragment timeout 0
Missing sequence number 0
Out-of-order sequence number 0
Out-of-range sequence number 0
Hardware errors (sticky):
Data memory error 0
Control memory error 0
Egress queues: 8 supported, 4 in use
Queue counters: Queued packets Transmitted packets Dropped packets
0 be 0 0 0
1 expedited-fo 0 0 0
2 assured-forw 0 0 0
3 network-cont 0 0 0
Logical interface rlsq0.0 (Index 72) (SNMP ifIndex 88) (Generation 31)
Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: Multilink-PPP
Bandwidth: 0
Bundle options:
MRRU 1504
Remote MRRU N/A
Drop timer period 2000
Sequence number format long (24 bits)
Fragmentation threshold 0
Links needed to sustain bundle 1
Multilink classes 0
Link layer overhead 4.0 %
Bundle status:
Received sequence number 0xffffff
Transmit sequence number 0x0
Packet drops 0 (0 bytes)
Fragment drops 0 (0 bytes)
MRRU exceeded 0
Fragment timeout 0
Missing sequence number 0
Out-of-order sequence number 0
Out-of-range sequence number 0
Packet data buffer overflow 0
Fragment data buffer overflow 0
Statistics Frames fps Bytes bps
Bundle:
Fragments:
Input : 3 0 255 0
Output: 3 0 264 0
Packets:
Input : 3 0 252 0
Output: 0 0 0 0
Link:
t1-1/3/0:1.0
Input : 3 0 255 0
Output: 0 0 0 0
t1-1/3/0:2.0
Input : 0 0 0 0
Output: 3 0 264 0
NCP state: inet: Opened, inet6: Not-configured, iso: Not-configured, mpls:
Not-configured
Protocol inet, MTU: 1500, Generation: 43, Route table: 0
Flags: None
Addresses, Flags: Is-Preferred Is-Primary
Destination: 2.2.2.0/30, Local: 2.2.2.1, Broadcast: Unspecified,
Generation: 45
The output for the show interfaces rlsq extensive command is identical to that for the show interfaces rlsq detail command. For sample output, see show interfaces detail (Redundant Link Services IQ).
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |