[Contents] [Prev] [Next] [Index] [Report an Error]

show interfaces redundancy

Syntax



show interfaces redundancy

Release Information

Command introduced before JUNOS Release 7.4.

Description

(M-series, T-series, and MX-series routing platforms only) Display general information about adaptive services and link services intelligent queuing (IQ) interfaces redundancy.

Options

This command has no options.

Required Privilege Level

view

List of Sample Output

show interfaces redundancy

Output Fields

Table 115 lists the output fields for the show interfaces redundancy command. Output fields are listed in the approximate order in which they appear.

Table 115: show interfaces redundancy Output Fields

Field Name	Field Description
Interface	Name of the redundant adaptive services or link services IQ interface.
State	State of the redundant interface: Not present, On primary, or On secondary.
Last Change	Timestamp for the last change in status.
Primary	Name of the interface configured to be the primary interface.
Secondary	Name of the interface configured to be the backup interface.
Current Status	Physical status of the primary and secondary interfaces.

show interfaces redundancy

user@host> show interfaces redundancy

Interface  State         Last change  Primary    Secondary  Current status
rsp0       Not present                sp-1/0/0   sp-0/2/0   both down
rsp1       On secondary  1d 23:56     sp-1/2/0   sp-0/3/0   primary down
rsp2       On primary    10:10:27     sp-1/3/0   sp-0/2/0   secondary down 
rlsq0      On primary    00:06:24     lsq-0/3/0  lsq-1/0/0  both up

[Contents] [Prev] [Next] [Index] [Report an Error]