show interfaces diagnostics optics (10-Gigabit Ethernet)

(M120, M320, T320, MX960, and T640 routers only) Display diagnostics data and alarms for 10-Gigabit Ethernet dense wavelength-division multiplexing (DWDM) interfaces.

Options

interface-name — Interface name: ge-fpc/pic/port or xe-fpc/pic/port.

Additional Information

XENPAK Multisource Agreement (MSA) optics, 300-pin MSA optics, bidirectional small form-factor pluggable transceiver (SFP) optics, SFP optics, 10-gigabit small form-factor pluggable transceiver (XFP) optics, and Optical Transport Network (OTN) optics are supported. The 300-pin MSA tool kit polls the PIC and the XENPAK driver polls the XENPAK transceiver in 1-second intervals for diagnostics data, alarms, and warnings and stores them into memory. The alarms will not cause the links to go down or the LEDs to change color, nor generate SNMP traps. Changes in alarm and warning status will generate system log messages.

Thresholds that trigger a high alarm, low alarm, high warning, or low warning are set by the transponder vendors. Generally, a high alarm or low alarm indicates that the optics module is not operating properly. This information can be used to diagnose why a PIC is not working.

Required Privilege Level

List of Sample Output

Output Fields

Table 34 lists the output fields for the show interfaces diagnostics optics command when the router is operating with MSA optics. Output fields are listed in the approximate order in which they appear.

Table 34: 10-Gigabit Ethernet 300-Pin MSA Optics show interfaces diagnostics optics Output Fields

Field Name	Field Description
Physical interface	Name of the physical interface.
Laser bias current	Magnitude of the laser bias power setting current, in milliamperes. The laser bias provides direct modulation of laser diodes and modulates currents.
Laser output power	Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm). This is a software equivalent to the LsPOWMON pin in hardware.
Receiver signal average optical power	Average received optical power, in mW and dBm. This indicator is a software equivalent to the RxPOWMON pin in hardware. Average optical power is vendor-specific. For example: Intel—Rx power monitor: +/- 1dB Opnext—Rx power monitor: +/- 1.5 dB
Laser end-of-life alarm	Laser end-of-life alarm: On or Off.
Laser wavelength alarm	Laser wavelength alarm: On or Off.
Laser bias current alarm	Laser bias current alarm: On or Off.
Laser temperature alarm	Laser temperature alarm: On or Off.
Laser power alarm	Laser power alarm: On or Off.
Modulator temperature alarm	(Opnext 300-pin MSA transponders only) Modulator temperature alarm: On or Off.
Modulator bias alarm	Modulator bias alarm: On or Off.
Tx multiplexer FIFO error alarm	Transmit multiplexer first in, first out (FIFO) error alarm: On or Off.
Tx loss of PLL lock alarm	Transmit loss of phase-locked loop (PLL) lock alarm: On or Off.
Rx loss of average optical power alarm	Receive loss of average optical power alarm: On or Off.
Rx loss of AC power alarm	(Opnext 300-pin MSA transponders only) Receive loss of AC power alarm: On or Off.
Rx loss of PLL lock alarm	Receive loss of phase-locked loop (PLL) lock alarm: On or Off.

Table 35 lists the output fields for the show interfaces diagnostics optics command when the router is operating with bidirectional SFP optics. Output fields are listed in the approximate order in which they appear.

Table 35: 10-Gigabit Ethernet Bidirectional SFP Optics show interfaces diagnostics optics Output Fields

Field Name	Field Description
Physical interface	Name of the physical interface.
Laser bias current	Magnitude of the laser bias power setting current, in milliamperes. The laser bias provides direct modulation of laser diodes and modulates currents.
Laser output power	Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm).
Module temperature	Temperature of the XFP optics module, in Celsius and Fahrenheit.
Module voltage	Internally measured module voltage.
Receiver signal average optical power	Average received optical power, in mW and dBm.
Laser bias current high alarm	Laser bias power setting high alarm. Displays on or off.
Laser bias current low alarm	Laser bias power setting low alarm. Displays on or off.
Laser bias current high warning	Laser bias power setting high warning. Displays on or off.
Laser bias current low warning	Laser bias power setting low warning. Displays on or off.
Laser output power high alarm	Laser output power high alarm. Displays on or off.
Laser output power low alarm	Laser output power low alarm. Displays on or off.
Laser output power high warning	Laser output power high warning. Displays on or off.
Laser output power low warning	Laser output power low warning. Displays on or off.
Module temperature high alarm	Module temperature high alarm. Displays on or off.
Module temperature low alarm	Module temperature low alarm. Displays on or off.
Module temperature high warning	Module temperature high warning. Displays on or off.
Module temperature low warning	Module temperature low warning. Displays on or off.
Module voltage high alarm	Module voltage high alarm. Displays on or off.
Module voltage low alarm	Module voltage low alarm. Displays on or off.
Module voltage high warning	Module voltage high warning. Displays on or off.
Module voltage low warning	Module voltage high warning. Displays on or off.
Laser rx power high alarm	Receive laser power high alarm. Displays on or off.
Laser rx power low alarm	Receive laser power low alarm. Displays on or off.
Laser rx power high warning	Receive laser power high warning. Displays on or off.
Laser rx power low warning	Receive laser power low warning. Displays on or off.
Laser bias current high alarm threshold	Vendor-specified threshold for the laser bias current high alarm: 70.000 mA.
Laser bias current low alarm threshold	Vendor-specified threshold for the laser bias current low alarm: 0.0002 mA.
Laser bias current high warning threshold	Vendor-specified threshold for the laser bias current high warning: 65.000 mA.
Laser bias current low warning threshold	Vendor-specified threshold for the laser bias current low warning: 0.0002 mA.
Laser output power high alarm threshold	Vendor-specified threshold for the laser output power high alarm: 1.0000 mW or 0.00 dBm.
Laser output power low alarm threshold	Vendor-specified threshold for the laser output power low alarm: 0.0560 mW or -12.52 dBm.
Laser output power high warning threshold	Vendor-specified threshold for the laser output power high warning: 0.6300 mW or -2.01 dBm.
Laser output power low warning threshold	Vendor-specified threshold for the laser output power low warning: 0.0890 mW or -10.51 dBm.
Module temperature high alarm threshold	Vendor-specified threshold for the module temperature high alarm: 100° C or 212° F.
Module temperature low alarm threshold	Vendor-specified threshold for the module temperature low alarm: -50° C or -58° F.
Module temperature high warning threshold	Vendor-specified threshold for the module temperature high warning: 95 ° C or 203 ° F.
Module temperature low warning threshold	Vendor-specified threshold for the module temperature low warning: -48° C or -54° F.
Module voltage high alarm threshold	Module voltage high alarm threshold: 3.700 v.
Module voltage low alarm threshold	Module voltage low alarm threshold: 2.900 v.
Module voltage high warning threshold	Module voltage high warning threshold: 3.7600 v.
Module voltage low warning threshold	Module voltage low warning threshold: 3.000 v.
Laser rx power high alarm threshold	Vendor-specified threshold for the laser Rx power high alarm: 1.9953 mW or 3.00 dBm.
Laser rx power low alarm threshold	Vendor-specified threshold for the laser Rx power low alarm: 0.0001 mW or -40.00 dBm.
Laser rx power high warning threshold	Vendor-specified threshold for the laser Rx power high warning: 1.0000 mW or 0.00 dBm.
Laser rx power low warning threshold	Vendor-specified threshold for the laser Rx power low warning: 0.0010 mW or -30.00 dBm.

Table 36 lists the output fields for the show interfaces diagnostics optics command generated from 10-Gigabit Ethernet XENPAK OTN optics.

Field Name	Field Description
Physical interface	Name of the physical interface.
Laser bias current	Measured laser bias current in uA.
Laser output power	Measured laser output power in mW.
Module temperature	Internally measured module temperature.
Laser rx power	Measured receive optical power in mW.
Laser bias current high alarm	Laser bias current high alarm: On or Off. Alarm ranges are vendor-specific.
Laser bias current low alarm	Laser bias current low alarm: On or Off. Alarm ranges are vendor-specific.
Laser output power high alarm	Laser output power high alarm: On or Off. Alarm ranges are vendor-specific.
Laser output power low alarm	Laser output power low alarm: On or Off. Alarm ranges are vendor-specific.
Module temp high alarm	Module temperature high alarm: On or Off. Alarm ranges are vendor-specific.
Module temp low alarm	Module temperature low alarm: On or Off. Alarm ranges are vendor-specific.
Laser rx power high alarm	Laser receive power high alarm: On or Off. Alarm ranges are vendor-specific.
Laser rx power low alarm	Laser receive power low alarm: On or Off. Alarm ranges are vendor-specific.
Laser bias current high warning	Laser bias current high warning: On or Off. Warning ranges are vendor-specific.
Laser bias current low warning	Laser bias current low warning: On or Off. Warning ranges are vendor-specific.
Laser output power high warning	Laser output power high warning: On or Off. Warning ranges are vendor-specific.
Laser output power low warning	Laser output power low warning: On or Off. Warning ranges are vendor-specific.
Module temp high warning	Module temperature high warning: On or Off. Warning ranges are vendor-specific.
Module temp low warning	Module temperature low warning: On or Off. Warning ranges are vendor-specific.
Laser rx power high warning	Laser receive power high warning: On or Off. Warning ranges are vendor-specific.
Laser rx power low warning	Laser receive power low warning: On or Off. Warning ranges are vendor-specific.
Laser bias current high alarm threshold	Vendor-specified threshold for the laser bias current high alarm: 31.000 mA.
Laser bias current low alarm threshold	Vendor-specified threshold for the laser bias current low alarm: 10.000 mA.
Laser output power high alarm threshold	Vendor-specified threshold for the laser output power high alarm: 6.000 mW or 7.78 dBm.
Laser output power low alarm threshold	Vendor-specified threshold for the laser output power low alarm: 0.100 mW or -10.00 dBm.
Module temperature high alarm threshold	Vendor-specified threshold for the module temperature high alarm: 85° C or 185° F.
Module temperature low alarm threshold	Vendor-specified threshold for the module temperature low alarm: 0° C or 32° F.
Laser rx power high alarm threshold	Vendor-specified threshold for the laser Rx power high alarm: 1.000 mW or 0.00 dBm.
Laser rx power low alarm threshold	Vendor-specified threshold for the laser Rx power low alarm: 0.001 mW or -30.00 dBm.
Laser bias current high warning threshold	Vendor-specified threshold for the laser bias current high warning: 28.000 mA.
Laser bias current low warning threshold	Vendor-specified threshold for the laser bias current low warning: 11.000 mA.
Laser output power high warning threshold	Vendor-specified threshold for the laser output power high warning: 5.000 mW or 6.99 dBm.
Laser output power low warning threshold	Vendor-specified threshold for the laser output power low warning: 0.500 mW or -3.01 dBm.
Module temperature high warning threshold	Vendor-specified threshold for the module temperature high warning: 70° C or 158° F.
Module temperature low warning threshold	Vendor-specified threshold for the module temperature low warning: 10° C or 50° F.
Laser rx power high warning threshold	Vendor-specified threshold for the laser Rx power high warning: 0.501 mW or -3.00 dBm.
Laser rx power low warning threshold	Vendor-specified threshold for the laser Rx power low warning: 0.001 mW or -28.86 dBm.

Table 37 lists the output fields for the show interfaces diagnostics optics command when the router is operating with SFP MSA optics. Output fields are listed in the approximate order in which they appear.

Table 37: 10-Gigabit Ethernet SFP MSA Optics show interfaces diagnostics Output Fields

Field Name	Field Description
Physical interface	Name of the physical interface.
Laser bias current	Measured laser bias current in uA.
Laser output power	Measured laser output power in mW.
Module temperature	Internally measured module temperature.
Module voltage	Internally measured module voltage.
Laser rx power	Measured receive optical power in mW.
Laser bias current high alarm	Laser bias current high alarm: On or Off. Alarm ranges are vendor-specific.
Laser bias current low alarm	Laser bias current low alarm: On or Off. Alarm ranges are vendor-specific.
Laser output power high alarm	Laser output power high alarm: On or Off. Alarm ranges are vendor-specific.
Laser output power low alarm	Laser output power low alarm: On or Off. Alarm ranges are vendor-specific.
Module temp high alarm	Module temperature high alarm: On or Off. Alarm ranges are vendor-specific.
Module temp low alarm	Module temperature low alarm: On or Off. Alarm ranges are vendor-specific.
Laser rx power high alarm	Laser receive power high alarm: On or Off. Alarm ranges are vendor-specific.
Laser rx power low alarm	Laser receive power low alarm: On or Off. Alarm ranges are vendor-specific.
Laser bias current high warning	Laser bias current high warning: On or Off. Warning ranges are vendor-specific.
Laser bias current low warning	Laser bias current low warning: On or Off. Warning ranges are vendor-specific.
Laser output power high warning	Laser output power high warning: On or Off. Warning ranges are vendor-specific.
Laser output power low warning	Laser output power low warning: On or Off. Warning ranges are vendor-specific.
Module temperature high warning	Module temperature high warning: On or Off. Warning ranges are vendor-specific.
Module temperature low warning	Module temperature low warning: On or Off. Warning ranges are vendor-specific.
Laser rx power high warning	Laser receive power high warning: On or Off. Warning ranges are vendor-specific.
Laser rx power low warning	Laser receive power low warning: On or Off. Warning ranges are vendor-specific.
Laser bias current high alarm threshold	Laser bias current high alarm threshold. Alarm threshold ranges are vendor-specific.
Laser bias current low alarm threshold	Laser bias current low alarm threshold. Alarm threshold ranges are vendor-specific.
Laser bias current high warning threshold	Laser bias current high warning threshold. Warning ranges are vendor-specific.
Laser bias current low warning threshold	Laser bias current low warning threshold. Warning ranges are vendor-specific.
Laser output power high alarm threshold	Laser output power high alarm threshold. Alarm threshold ranges are vendor-specific.
Laser output power low alarm threshold	Laser output power low alarm threshold. Alarm threshold ranges are vendor-specific.
Laser output power high warning threshold	Laser output power high warning threshold. Warning ranges are vendor-specific.
Laser output power low warning threshold	Laser output power low warning threshold. Warning ranges are vendor-specific.
Module temperature high alarm threshold	Module temperature high alarm threshold. Alarm threshold ranges are vendor-specific.
Module temperature low alarm threshold	Module temperature low alarm threshold. Alarm threshold ranges are vendor-specific.
Module temperature high warning threshold	Module temperature high warning threshold. Warning ranges are vendor-specific.
Module temperature low warning threshold	Module temperature low warning threshold. Warning ranges are vendor-specific.
Module voltage high alarm threshold	Module voltage high alarm threshold. Alarm ranges are vendor-specific.
Module voltage low alarm threshold	Module voltage low alarm threshold. Alarm ranges are vendor-specific.
Module voltage high warning threshold	Module voltage high warning threshold. Warning ranges are vendor-specific.
Module voltage low warning threshold	Module voltage low warning threshold. Warning ranges are vendor-specific.
Laser rx power high alarm threshold	Laser receive power high alarm threshold. Alarm threshold ranges are vendor-specific.
Laser rx power low alarm threshold	Laser receive power low alarm threshold. Alarm threshold ranges are vendor-specific.
Laser rx power high warning threshold	Laser receive power high warning threshold. Warning threshold ranges are vendor-specific.
Laser rx power high low threshold	Laser receive power high warning threshold. Warning threshold ranges are vendor-specific.

Table 38 lists the output fields for the show interfaces diagnostics optics command when the router is operating with XENPAK MSA optics. Output fields are listed in the approximate order in which they appear.

Field Name	Field Description
Physical interface	Name of the physical interface.
Laser bias current	Measured laser bias current in mA.
Laser output power	Measured laser output power in mW.
Module temperature	Internally measured module temperature.
Laser rx power	Measured receive optical power in mW.
Laser bias current high alarm	Laser bias current high alarm: On or Off. Alarm ranges are vendor-specific.
Laser bias current low alarm	Laser bias current low alarm: On or Off. Alarm ranges are vendor-specific.
Laser output power high alarm	Laser output power high alarm: On or Off. Alarm ranges are vendor-specific.
Laser output power low alarm	Laser output power low alarm: On or Off. Alarm ranges are vendor-specific.
Module temp high alarm	Module temperature high alarm: On or Off. Alarm ranges are vendor-specific.
Module temp low alarm	Module temperature low alarm: On or Off. Alarm ranges are vendor-specific.
Laser rx power high alarm	Laser receive power high alarm: On or Off. Alarm ranges are vendor-specific.
Laser rx power low alarm	Laser receive power low alarm: On or Off. Alarm ranges are vendor-specific.
Laser bias current high warning	Laser bias current high warning: On or Off. Warning ranges are vendor-specific.
Laser bias current low warning	Laser bias current low warning: On or Off. Warning ranges are vendor-specific.
Laser output power high warning	Laser output power high warning: On or Off. Warning ranges are vendor-specific.
Laser output power low warning	Laser output power low warning: On or Off. Warning ranges are vendor-specific.
Module temperature high warning	Module temperature high warning: On or Off. Warning ranges are vendor-specific.
Module temperature low warning	Module temperature low warning: On or Off. Warning ranges are vendor-specific.
Laser rx power high warning	Laser receive power high warning: On or Off. Warning ranges are vendor-specific.
Laser rx power low warning	Laser receive power low warning: On or Off. Warning ranges are vendor-specific.
Laser bias current high alarm threshold	Laser bias current high alarm threshold. Alarm threshold ranges are vendor-specific.
Laser bias current low alarm threshold	Laser bias current low alarm threshold. Alarm threshold ranges are vendor-specific.
Laser output power high alarm threshold	Laser output power high alarm threshold. Alarm threshold ranges are vendor-specific.
Laser output power low alarm threshold	Laser output power low alarm threshold. Alarm threshold ranges are vendor-specific.
Module temperature high alarm threshold	Module temperature high alarm threshold. Alarm threshold ranges are vendor-specific.
Module temperature low alarm threshold	Module temperature low alarm threshold. Alarm threshold ranges are vendor-specific.
Laser rx power high alarm threshold	Laser receive power high alarm threshold. Alarm threshold ranges are vendor-specific.
Laser rx power low alarm threshold	Laser receive power low alarm threshold. Alarm threshold ranges are vendor-specific.
Laser bias current high warning threshold	Laser bias current high warning threshold. Warning ranges are vendor-specific.
Laser bias current low warning threshold	Laser bias current low warning threshold. Warning ranges are vendor-specific.
Laser output power high warning threshold	Laser output power high warning threshold. Warning ranges are vendor-specific.
Laser output power low warning threshold	Laser output power low warning threshold. Warning ranges are vendor-specific.
Module temperature high warning threshold	Module temperature high warning threshold. Warning ranges are vendor-specific.
Module temperature low warning threshold	Module temperature low warning threshold. Warning ranges are vendor-specific.
Laser rx power high warning threshold	Laser receive power high warning threshold. Warning threshold ranges are vendor-specific.
Laser rx power low warning threshold	Laser receive power low warning threshold. Warning threshold ranges are vendor-specific.

Table 39 lists the output fields for the show interfaces diagnostics optics command when the router is operating with XFP optics. Output fields are listed in the approximate order in which they appear.

Table 39: 10-Gigabit Ethernet XFP Optics show interfaces diagnostics optics Output Fields

Field Name	Field Description
Physical interface	Name of the physical interface.
Laser bias current	Magnitude of the laser bias power setting current, in milliamperes. The laser bias provides direct modulation of laser diodes and modulates currents.
Laser output power	Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm). This is a software equivalent to the LsPOWMON pin in hardware.
Module temperature	Temperature of the XFP optics module, in Celsius and Fahrenheit.
Laser rx power	Laser received optical power, in mW and dBm.
Laser bias current high alarm	Laser bias power setting high alarm. Displays on or off.
Laser bias current low alarm	Laser bias power setting low alarm. Displays on or off.
Laser bias current high warning	Laser bias power setting high warning. Displays on or off.
Laser bias current low warning	Laser bias power setting low warning. Displays on or off.
Laser output power high alarm	Laser output power high alarm. Displays on or off.
Laser output power low alarm	Laser output power low alarm. Displays on or off.
Laser output power high warning	Laser output power high warning. Displays on or off.
Laser output power low warning	Laser output power low warning. Displays on or off.
Module temperature high alarm	Module temperature high alarm. Displays on or off.
Module temperature low alarm	Module temperature low alarm. Displays on or off.
Module temperature high warning	Module temperature high warning. Displays on or off.
Module temperature low warning	Module temperature low warning. Displays on or off.
Laser rx power high alarm	Receive laser power high alarm. Displays on or off.
Laser rx power low alarm	Receive laser power low alarm. Displays on or off.
Laser rx power high warning	Receive laser power high warning. Displays on or off.
Laser rx power low warning	Receive laser power low warning. Displays on or off.
Module not ready alarm	Module not ready alarm. When on, indicates the module has an operational fault. Displays on or off.
Module power down alarm	Module power down alarm. When on, module is in a limited power mode, low for normal operation. Displays on or off.
Tx data not ready alarm	Any condition leading to invalid data on the transmit path. Displays on or off.
Tx not ready alarm	Any condition leading to invalid data on the transmit path. Displays on or off.
Tx laser fault alarm	Laser fault condition. Displays on or off.
Tx CDR loss of lock alarm	Transmit clock and data recovery (CDR) loss of lock. Loss of lock on the transmit side of the CDR. Displays on or off.
Rx not ready alarm	Any condition leading to invalid data on the receive path. Displays on or off.
Rx loss of signal alarm	Receive Loss of Signal alarm. When on, indicates insufficient optical input power to the module. Displays on or off.
Rx CDR loss of lock alarm	Receive CDR loss of lock. Loss of lock on the receive side of the CDR. Displays on or off.
Laser bias current high alarm threshold	Vendor-specified threshold for the laser bias current high alarm: 130.000 mA.
Laser bias current low alarm threshold	Vendor-specified threshold for the laser bias current low alarm: 10.000 mA.
Laser bias current high warning threshold	Vendor-specified threshold for the laser bias current high warning: 120.000 mA.
Laser bias current low warning threshold	Vendor-specified threshold for the laser bias current low warning: 12.000 mA.
Laser output power high alarm threshold	Vendor-specified threshold for the laser output power high alarm: 0.8910 mW or -0.50 dBm.
Laser output power low alarm threshold	Vendor-specified threshold for the laser output power low alarm: 0.2230 mW or -6.52 dBm.
Laser output power high warning threshold	Vendor-specified threshold for the laser output power high warning: 0.7940 mW or -100 dBm.
Laser output power low warning threshold	Vendor-specified threshold for the laser output power low warning: 0.2510 mW or -600 dBm.
Module temperature high alarm threshold	Vendor-specified threshold for the module temperature high alarm: 90° C or 194° F.
Module temperature low alarm threshold	Vendor-specified threshold for the module temperature low alarm: -5° C or 23° F.
Module temperature high warning threshold	Vendor-specified threshold for the module temperature high warning: 85 ° C or 185 ° F.
Module temperature low warning threshold	Vendor-specified threshold for the module temperature low warning: 0° C or 32° F.
Laser rx power high alarm threshold	Vendor-specified threshold for the laser Rx power high alarm: 1.2589 mW or 1.00 dBm.
Laser rx power low alarm threshold	Vendor-specified threshold for the laser Rx power low alarm: 0.0323 mW or -14.91 dBm.
Laser rx power high warning threshold	Vendor-specified threshold for the laser Rx power high warning: 1.1220 mW or 0.50 dBm.
Laser rx power low warning threshold	Vendor-specified threshold for the laser Rx power low warning: 0.0363 mW or -14.40 dBm.

show interfaces diagnostics optics (300-Pin MSA Optics)

user@host> show interfaces diagnostics optics
ge-5/0/0

Physical interface: ge-5/0/0
  Laser bias current                    :  79.938 mA 
  Laser output power                    :  1.592 mW / 2.02 dBm
  Receiver signal average optical power :  1.3854 mW / 1.42 dBm
  Laser end-of-life alarm               :  Off
  Laser wavelength alarm                :  Off
  Laser bias current alarm              :  Off
  Laser temperature alarm               :  Off
  Laser power alarm                     :  Off
  Modulator temperature alarm           :  Off
  Modulator bias alarm                  :  Off
  Tx multiplexer FIFO error alarm       :  Off
  Tx loss of PLL lock alarm             :  Off
  Rx loss of average optical power alarm:  Off
  Rx loss of AC power alarm             :  Off
  Rx loss of PLL lock alarm             :  Off

show interfaces diagnostics optics (Bidirectional SFP Optics)

user@host> show interfaces diagnostics optics
ge-3/0/6

Physical interface: ge-3/0/6
    Laser bias current                        :  13.356 mA
    Laser output power                        :  0.2210 mW / -6.56 dBm
    Module temperature                        :  36 degrees C / 96 degrees F
    Module voltage                            :  3.2180 V
    Receiver signal average optical power     :  0.2429 mW / -6.15 dBm
    Laser bias current high alarm             :  Off
    Laser bias current low alarm              :  Off
    Laser bias current high warning           :  Off
    Laser bias current low warning            :  Off
    Laser output power high alarm             :  Off
    Laser output power low alarm              :  Off
    Laser output power high warning           :  Off
    Laser output power low warning            :  Off
    Module temperature high alarm             :  Off
    Module temperature low alarm              :  Off
    Module temperature high warning           :  Off
    Module temperature low warning            :  Off
    Module voltage high alarm                 :  Off
    Module voltage low alarm                  :  Off
    Module voltage high warning               :  Off
    Module voltage low warning                :  Off
    Laser rx power high alarm                 :  Off
    Laser rx power low alarm                  :  Off
    Laser rx power high warning               :  Off
    Laser rx power low warning                :  Off
    Laser bias current high alarm threshold   :  70.000 mA
    Laser bias current low alarm threshold    :  0.002 mA
    Laser bias current high warning threshold :  65.000 mA
    Laser bias current low warning threshold  :  0.002 mA
    Laser output power high alarm threshold   :  1.0000 mW / 0.00 dBm
    Laser output power low alarm threshold    :  0.0560 mW / -12.52 dBm
    Laser output power high warning threshold :  0.6300 mW / -2.01 dBm
    Laser output power low warning threshold  :  0.0890 mW / -10.51 dBm
    Module temperature high alarm threshold   :  100 degrees C / 212 degrees F
    Module temperature low alarm threshold    :  -50 degrees C / -58 degrees F
    Module temperature high warning threshold :  95 degrees C / 203 degrees F
    Module temperature low warning threshold  :  -48 degrees C / -54 degrees F
    Module voltage high alarm threshold       :  3.700 V
    Module voltage low alarm threshold        :  2.900 V
    Module voltage high warning threshold     :  3.600 V
    Module voltage low warning threshold      :  3.000 V
    Laser rx power high alarm threshold       :  1.9953 mW / 3.00 dBm
    Laser rx power low alarm threshold        :  0.0001 mW / -40.00 dBm
    Laser rx power high warning threshold     :  1.0000 mW / 0.00 dBm
    Laser rx power low warning threshold      :  0.0010 mW / -30.00 dBm

show interfaces diagnostics optics (OTN Optics)

user@host> show interfaces diagnostics optics
ge-0/3/0

Physical interface: ge-0/3/0
    Laser bias current                        :  23.408 mA
    Laser output power                        :  1.479 mW / 1.70 dBm
    Module temperature                        :  37 degrees C / 99 degrees F
    Laser rx power                            :  0.121 mW / -9.16 dBm
    Laser bias current high alarm             :  Off
    Laser bias current low alarm              :  Off
    Laser output power high alarm             :  Off
    Laser output power low alarm              :  Off
    Module temperature high alarm             :  Off
    Module temperature low alarm              :  Off
    Laser rx power high alarm                 :  Off
    Laser rx power low alarm                  :  Off
    Laser bias current high warning           :  Off
    Laser bias current low warning            :  Off
    Laser output power high warning           :  Off
    Laser output power low warning            :  Off
    Module temperature high warning           :  Off
    Module temperature low warning            :  Off
    Laser rx power high warning               :  Off
    Laser rx power low warning                :  Off
    Laser bias current high alarm threshold   :  31.000 mA
    Laser bias current low alarm threshold    :  10.000 mA
    Laser output power high alarm threshold   :  6.000 mW / 7.78 dBm
    Laser output power low alarm threshold    :  0.100 mW / -10.00 dBm
    Module temperature high alarm threshold   :  85 degrees C / 185 degrees F
    Module temperature low alarm threshold    :  0 degrees C / 32 degrees F
    Laser rx power high alarm threshold       :  1.000 mW / 0.00 dBm
    Laser rx power low alarm threshold        :  0.001 mW / -30.00 dBm
    Laser bias current high warning threshold :  28.000 mA
    Laser bias current low warning threshold  :  11.000 mA
    Laser output power high warning threshold :  5.000 mW / 6.99 dBm
    Laser output power low warning threshold  :  0.500 mW / -3.01 dBm
    Module temperature high warning threshold :  70 degrees C / 158 degrees F
    Module temperature low warning threshold  :  10 degrees C / 50 degrees F
    Laser rx power high warning threshold     :  0.501 mW / -3.00 dBm
    Laser rx power low warning threshold      :  0.001 mW / -28.86 dBm

show interfaces diagnostics optics (SFP MSA Optics)

user@host> show interfaces diagnostics optics
ge-1/0/0

Physical interface: ge-1/0/0
        Laser bias current                        :  49.010 mA
        Laser output power                        :  1.263 mW / 1.01 dBm
        Module temperature                        :  17 degrees C / 62 degrees F
        Module voltage                            :  4.21 V
        Laser rx power                            :  0.060 mW / -12.21 dBm
        Laser bias current high alarm             :  Off
        Laser bias current low alarm              :  Off
        Laser output power high alarm             :  Off
        Laser output power low alarm              :  Off
        Module temperature high alarm             :  Off
        Module temperature low alarm              :  Off
        Module voltage high alarm                 :  Off
        Module voltage low alarm                  :  Off
        Laser rx power high alarm                 :  Off
        Laser rx power low alarm                  :  Off
        Laser bias current high warning           :  Off
        Laser bias current low warning            :  Off
        Laser output power high warning           :  Off
        Laser output power low warning            :  Off
        Module temperature high warning           :  Off
        Module temperature low warning            :  Off
        Module voltage high warning               :  Off
        Module voltage low warning                :  Off
        Laser rx power high warning               :  Off
        Laser rx power low warning                :  Off
        Laser bias current high alarm threshold   :  70.000 mA
        Laser bias current low alarm threshold    :  20.000 mA
        Laser bias current high warning threshold :  65.000 mA
        Laser bias current low warning threshold  :  25.000 mA
        Laser output power high alarm threshold   :  1.4120 mW / 1.50 dBm
        Laser output power low alarm threshold    :  0.1990 mW / -7.01 dBm
        Laser output power high warning threshold :  1.2580 mW / 1.00 dBm
        Laser output power low warning threshold  :  0.2230 mW / -6.52 dBm
        Module temperature high alarm threshold   :  78 degrees C /172 degrees F
        Module temperature low alarm threshold    :  13 degrees C / 9 degrees F
        Module temperature high warning threshold :  75 degrees C /167 degrees F
        Module temperature low warning threshold  :  10 degrees C / 14 degrees F
        Module voltage high alarm threshold       :  5.71 V
        Module voltage low alarm threshold        :  2.05 V
        Module voltage high warning threshold     :  5.20 V
        Module voltage low warning threshold      :  3.11 V
        Laser rx power high alarm threshold       :  1.7783 mW / 2.50 dBm
        Laser rx power low alarm threshold        :  0.0100 mW / -20.00 dBm
        Laser rx power high warning threshold     :  1.5849 mW / 2.00 dBm
        Laser rx power low warning threshold      :  0.0158 mW / -18.01 dBm

show interfaces diagnostics optics (XENPAK MSA Optics)

user@host> show interfaces diagnostics optics
ge-1/0/0

Physical interface: ge-1/0/0
    Laser bias current                        :  57.250 mA
    Laser output power                        :  1.295 mW / 1.12 dBm
    Module temperature                        :  24 degrees C / 76 degrees F
    Laser rx power                            :  0.000 mW / -35.23 dBm
    Laser bias current high alarm             :  Off
    Laser bias current low alarm              :  Off
    Laser output power high alarm             :  Off
    Laser output power low alarm              :  Off
    Module temperature high alarm             :  Off
    Module temperature low alarm              :  Off
    Laser rx power high alarm                 :  Off
    Laser rx power low alarm                  :  Off
    Laser bias current high warning           :  Off
    Laser bias current low warning            :  Off
    Laser output power high warning           :  Off
    Laser output power low warning            :  Off
    Module temperature high warning           :  Off
    Module temperature low warning            :  Off
    Laser rx power high warning               :  Off
    Laser rx power low warning                :  On
    Laser bias current high alarm threshold   :  110.000 mA
    Laser bias current low alarm threshold    :  30.000 mA
    Laser output power high alarm threshold   :  3.162 mW / 5.00 dBm
    Laser output power low alarm threshold    :  0.269 mW / -5.70 dBm
    Module temperature high alarm threshold   :  80 degrees C / 176 degrees F
    Module temperature low alarm threshold    :  -10 degrees C / 14 degrees F
    Laser rx power high alarm threshold       :  1.259 mW / 1.00 dBm
    Laser rx power low alarm threshold        :  0.005 mW / -23.01 dBm
    Laser bias current high warning threshold :  100.000 mA
    Laser bias current low warning threshold  :  40.000 mA
    Laser output power high warning threshold :  2.511 mW / 4.00 dBm
    Laser output power low warning threshold  :  0.338 mW / -4.71 dBm
    Module temperature high warning threshold :  75 degrees C / 167 degrees F
    Module temperature low warning threshold  :  -5 degrees C / 23 degrees F
    Laser rx power high warning threshold     :  1.000 mW / 0.00 dBm
    Laser rx power low warning threshold      :  0.010 mW / -20.00 dBm

show interfaces diagnostics optics (XFP Optics)

user@host> show interfaces diagnostics optics
xe-2/1/0

Physical interface: xe-2/1/0
    Laser bias current                        :  52.060 mA
    Laser output power                        :  0.5640 mW / -2.49 dBm
    Module temperature                        :  31 degrees C / 88 degrees F
    Laser rx power                            :  0.0844 mW / -10.74 dBm
    Laser bias current high alarm             :  Off
    Laser bias current low alarm              :  Off
    Laser bias current high warning           :  Off
    Laser bias current low warning            :  Off
    Laser output power high alarm             :  Off
    Laser output power low alarm              :  Off
    Laser output power high warning           :  Off
    Laser output power low warning            :  Off
    Module temperature high alarm             :  Off
    Module temperature low alarm              :  Off
    Module temperature high warning           :  Off
    Module temperature low warning            :  Off
    Laser rx power high alarm                 :  Off
    Laser rx power low alarm                  :  Off
    Laser rx power high warning               :  Off
    Laser rx power low warning                :  Off
    Module not ready alarm                    :  Off
    Module power down alarm                   :  Off
    Tx data not ready alarm                   :  Off
    Tx not ready alarm                        :  Off
    Tx laser fault alarm                      :  Off
    Tx CDR loss of lock alarm                 :  Off
    Rx not ready alarm                        :  Off
    Rx loss of signal alarm                   :  Off
    Rx CDR loss of lock alarm                 :  Off
    Laser bias current high alarm threshold   :  130.000 mA
    Laser bias current low alarm threshold    :  10.000 mA
    Laser bias current high warning threshold :  120.000 mA
    Laser bias current low warning threshold  :  12.000 mA
    Laser output power high alarm threshold   :  0.8910 mW / -0.50 dBm
    Laser output power low alarm threshold    :  0.2230 mW / -6.52 dBm
    Laser output power high warning threshold :  0.7940 mW / -1.00 dBm
    Laser output power low warning threshold  :  0.2510 mW / -6.00 dBm
    Module temperature high alarm threshold   :  90 degrees C / 194 degrees F
    Module temperature low alarm threshold    :  -5 degrees C / 23 degrees F
    Module temperature high warning threshold :  85 degrees C / 185 degrees F
    Module temperature low warning threshold  :  0 degrees C / 32 degrees F
    Laser rx power high alarm threshold       :  1.2589 mW / 1.00 dBm
    Laser rx power low alarm threshold        :  0.0323 mW / -14.91 dBm
    Laser rx power high warning threshold     :  1.1220 mW / 0.50 dBm
    Laser rx power low warning threshold      :  0.0363 mW / -14.40 dBm

Syntax

Release Information

Description