- show interfaces destination-class
- (all | destination-class-name logical-interface-name)
Command introduced before JUNOS Release 7.4.
all option introduced in JUNOS Release 8.0.
Display information about interfaces grouped by destination class.
all — Display information about all configured destination classes.
destination-class-name — Name of a logical grouping of prefixes that count packets having the destination address matching those prefixes. Whenever a destination class is specified, you must also specify a particular logical interface, not all interfaces.
logical interface-name — Name of a logical interface.
For interfaces that carry IPv4, IPv6, or Multiprotocol Label Switching (MPLS) traffic, you can maintain packet counts based on the entry and exit points for traffic passing through your network. Entry and exit points are identified by source and destination prefixes grouped into sets defined as source classes and destination classes. For more information, see the JUNOS Network Interfaces Configuration Guide.
view
Table 17 lists the output fields for the show interfaces destination-class command. Output fields are listed in the approximate order in which they appear.
Table 17: show interfaces destination-class Output Fields
user@host> show interfaces destination-class
all
Logical interface so-4/0/0.0
Packets Bytes
Destination class (packet-per-second) (bits-per-second)
gold 0 0
( 0) ( 0)
silver 0 0
( 0) ( 0)
Logical interface so-0/1/3.0
Packets Bytes
Destination class (packet-per-second) (bits-per-second)
gold 0 0
( 0) ( 0)
silver 0 0
( 0) ( 0)