[Contents] [Prev] [Next] [Index] [Report an Error]

show dialer defaults

Syntax



show dialer defaults

Release Information

Command introduced before JUNOS Release 7.4.

Description

(J-series routing platform only) Display ISDN services default software values.

Options

This command has no options.

Required Privilege Level

view

List of Sample Output

show dialer defaults

Output Fields

Table 86 lists the output fields for the show dialer defaults command. Output fields are listed in the approximate order in which they appear.

Table 86: show dialer defaults Output Fields

Field Name	Field Description
Idle timeout	Length of time (in seconds) that a connection can be idle before disconnecting.
Activation delay	Length of time (in seconds) to wait before enabling the interface after the primary interface has failed.
Deactivation delay	Length of time (in seconds) to wait before disabling the interface after the primary interface is operational.
Dialer watch initial route check time	Length of time (in seconds) before a route is checked for status.
Dialer pool priority	Priority of the dialer interface.
Dialer load threshold	Bandwidth threshold percentage used for adding interfaces. Another link is added to the multilink bundle when the bandwidth reaches the threshold value you set. The range of values is 0 through 100. When the value is set to 0, all available channels are dialed. The default value is 100.
Dialer load interval	Interval used to calculate the average load on the network. The range of values, in seconds, is 20 through 180, configurable in intervals of 10 seconds. The default value is 60.
Dialer redial delay	Delay, in seconds, between two successive calls made by the dialer (for dialout). The default value is 3 seconds.
Dialer callback wait period	For interfaces configured for ISDN with callback, the amount of time the dialer waits before calling back the caller. The default value is 5 seconds.

show dialer defaults

user@host> show dialer defaults

Dialer services related defaults :
  Idle timeout: 120 seconds
  Activation delay: 0 seconds
  Deactivation delay: 0 seconds
  Dialer watch initial route check time: 120 seconds
  Dialer pool priority: 0 seconds
  Dialer load threshold: 100%
  Dialer load interval: 60 seconds
  Dialer redial delay: 3 seconds
  Dialer callback wait period : 5 seconds

[Contents] [Prev] [Next] [Index] [Report an Error]