 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
- show system statistics clnl
- show system statistics clnl
- <all-lcc | lcc number | scc>
Command introduced before JUNOS Release 7.4.
Display system-wide Connectionless Network Layer (CLNL) statistics.
all-lcc — (Routing matrix only) (Optional) Display system statistics for CLNL for all T640 routing nodes (or line-card chassis) connected to a TX Matrix platform.
lcc number — (Routing matrix only) (Optional) Display system statistics for CLNL for a specified T640 routing node (or line-card chassis) connected to a TX Matrix platform. Replace number with a value from 0 through 3.
scc — (Routing matrix only) (Optional) Display system statistics for CLNL for the TX Matrix platform (or switch-card chassis).
By default, when you issue the show system statistics clnl command on a TX Matrix master Routing Engine, the command is broadcast to all the T640 master Routing Engines connected to it. Likewise, if you issue the same command on the TX Matrix backup Routing Engine, the command is broadcast to all the T640 backup Routing Engines that are connected to it.
view
Output field descriptions to be provided.
user@host> show system statistics clnl
clnl:
0 total packets received
0 packets delivered
0 too small
0 bad header length
0 bad checksum
0 bad version
0 unknown or unsupported protocol
0 bogus sdl size
0 no free memory in socket buffer
0 send packets discarded
0 sbappend failure
0 mcopy failure
0 address fields were not reasonable
0 segment information forgotten
0 forwarded packets
0 total packets sent
0 output packets discarded
0 non-forwarded packets
0 packets fragmented
0 fragments sent
0 fragments discarded
0 fragments timed out
0 fragmentation prohibited
0 packets reconstructed
0 packets destined to dead nexthop
0 packets discarded due to no route
0 Error pdu rate drops
0 ER pdu generation failure
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |