[Contents] [Prev] [Next] [Index] [Report an Error]

show chassis in-service-upgrade

Syntax

show chassis in-service-upgrade

Release Information

Command introduced in JUNOS Release 9.0.

Description

Display the status of Flexible PIC Concentrators (FPCs) and their corresponding Physical Interface Cards (PICs) after the most recent unified in-service software upgrade (ISSU). This command must be issued on the master Routing Engine.

Note: Only Intelligent Queuing (IQ) PICs are displayed by this command output. Unified ISSU status for other PIC types is controlled internally by the FPC.

Options

This command has no options.

Required Privilege Level

view

Related Topics

request system software in-service-upgrade

request system software abort

List of Sample Output

show chassis in-service-upgrade

Output Fields

Table 70 lists the output fields for the show chassis in-service-upgrade command. Output fields are listed in the approximate order in which they appear.

Table 70: show chassis in-service-upgrade Output Fields

Field Name

Field Description

Item

Flexible PIC Concentrator (FPC) slot number.

Status

FPC and corresponding PIC state: Online or Offline.

Reason

Reason for the state (if offline).

show chassis in-service-upgrade

user@host> show chassis in-service-upgrade 
  Item           Status                  Reason
  FPC 0          Online               
  FPC 1          Online               
  FPC 2          Online               
    PIC 0        Online               
    PIC 1        Online               
  FPC 3          Offline                 Offlined by CLI command                              
  FPC 4          Online               
    PIC 1        Online               
  FPC 5          Online               
    PIC 0        Online               
  FPC 6          Online               
    PIC 3        Online               
  FPC 7          Online
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.