 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
- show chassis fabric plane-location
Command introduced in JUNOS Release 8.0.
(M120 and MX-series routers only) Display the Control Board (CB) location of each plane. This command can be used on the master Routing Engine or the backup Routing Engine.
This command has no options.
view
Table 60 lists the output fields for the show chassis fabric plane location command. Output fields are listed in the approximate order in which they appear.
Table 60: show chassis fabric plane location Output Fields
|
Field Name |
Field Description |
|---|---|
|
Plane n |
Plane number. |
|
Control Board n |
Control board number. |
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------- Plane 0 Control Board 0 Plane 1 Control Board 0 Plane 2 Control Board 1 Plane 3 Control Board 1
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------- Plane 0 Control Board 0 Plane 1 Control Board 0 Plane 2 Control Board 0 Plane 3 Control Board 0 Plane 4 Control Board 1 Plane 5 Control Board 1 Plane 6 Control Board 1 Plane 7 Control Board 1
user@host> show chassis fabric plane-location
------------Fabric Plane Locations------------- Plane 0 Control Board 0 Plane 1 Control Board 0 Plane 2 Control Board 1 Plane 3 Control Board 1 Plane 4 Control Board 2 Plane 5 Control Board 2
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |