 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
- show chassis environment pem
- <slot>
- show chassis environment pem
- <lcc number | scc>
- <slot>
Command introduced before JUNOS Release 7.4.
(M40e, M120, M160, M320, and MX-series routers, and T-series routing platforms only) Display Power Entry Module (PEM) environmental status information.
none — Display environmental information about both PEMs. For the routing matrix only, display environmental information about the PEMs, the TX Matrix platform, and its attached T640 routing nodes.
lcc number — (Routing matrix only) (Optional) Display environmental information about the PEM in a specified T640 routing node (or line-card chassis) that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.
scc — (Routing matrix only) (Optional) Display environmental information about the PEM in the TX Matrix platform (or switch-card chassis).
slot — (Optional) Display environmental information about an individual PEM. Replace slot with 0 or 1.
view
Table 50 lists the output fields for the show chassis environment pem command. Output fields are listed in the approximate order in which they appear.
Table 50: show chassis environment pem Output Fields
user@host> show chassis environment pem
PEM 0 status: State Online Temperature OK AC input OK DC output OK
user@host> show chassis environment pem
PEM 0 status:
State Online
Temperature OK
DC Input: OK
DC Output: OK
Load Less than 20 percent
Voltage:
48.0 V input 52864 mV
48.0 V fan supply 41655 mV
3.3 V 3399 mV
PEM 1 status:
State Online
Temperature OK
DC Input: OK
DC Output: OK
Load Less than 20 percent
Voltage:
48.0 V input 54537 mV
48.0 V fan supply 42910 mV
3.3 V 3506 mV
user@host> show chassis environment pem
PEM 0 status:
State Online
Temperature OK
DC input OK
DC output OK
Load Less than 20 percent
Voltage:
48.0 V input 54833 mV
48.0 V fan supply 50549 mV
8.0 V bias 8239 mV
5.0 V bias 5006 mV
user@host> show chassis environment pem
PEM 2 status:
State Online
Temperature OK
DC input OK
Load Less than 40 percent
48.0 V input 51853 mV
48.0 V fan supply 48877 mV
8.0 V bias 8449 mV
5.0 V bias 4998 mV
PEM 3 status:
State Online
Temperature OK
DC input OK
Load Less than 40 percent
48.0 V input 51717 mV
48.0 V fan supply 49076 mV
8.0 V bias 8442 mV
5.0 V bias 4998 mV
user@host> show chassis environment pem
PEM 0 status: State Online Temperature OK DC Output: OK PEM 1 status: State Online Temperature OK DC Output: OK
user@host> show chassis environment pem
PEM 0 status: State Online Temperature OK DC Input: OK DC Output: OK Voltage: PEM 1 status: State Online Temperature OK DC Input: OK DC Output: OK Voltage:
user@host> show chassis environment pem
PEM 2 status: State Present PEM 3 status: State Online Temperature OK DC Output: OK
user@host> show chassis environment pem
PEM 0 status: State Online Temperature OK DC input: OK
user@host> show chassis environment pem
PEM 0 status:
State Online
Temperature 22 degrees C / 71 degrees F
DC input: OK
DC output: Voltage Current Power Load
FPC 0 56875 606 34 4
FPC 1 57016 525 29 3
FPC 2 0 0 0 0
FPC 3 0 0 0 0
FPC 4 0 0 0 0
FPC 5 0 0 0 0
FPC 6 57158 1581 90 12
FPC 7 0 0 0 0
SCG/CB/SIB 56750 1125 63 5
user@host> show chassis environment pem 0 lcc
0
lcc0-re0:
--------------------------------------------------------------------------
PEM 0 status:
State Present
Temperature 27 degrees C / 80 degrees F
DC input: Check
DC output: Voltage Current Power Load
FPC 0 0 0 0 0
FPC 1 0 0 0 0
FPC 2 0 0 0 0
FPC 3 0 0 0 0
FPC 4 0 0 0 0
FPC 5 0 0 0 0
FPC 6 0 0 0 0
FPC 7 0 0 0 0
SCG/CB/SIB 0 0 0 0
user@host> show chassis environment pem scc
scc-re0:
--------------------------------------------------------------------------
PEM 1 status:
State Online
Temperature 24 degrees C / 75 degrees F
DC input: OK
DC output: Voltage Current Power Load
SIB 0 0 0 0 0
SIB 1 0 0 0 0
SIB 2 0 0 0 0
SIB 3 56550 0 0 0
SIB 4 55958 6912 386 51
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |