[Contents] [Prev] [Next] [Index] [Report an Error]

show chassis environment fpm

Syntax



show chassis environment fpm

Syntax (Routing Matrix)



show chassis environment fpm 
<lcc number | scc>

Release Information

Command introduced before JUNOS Release 7.4.

Description

(M40e, M120, M160, M320, and MX-series routers, and T-series routing platforms only) Display environmental information about the front panel module in the router.

Options

none — (Routing matrix only) Display environmental information about the front panel modules (craft interfaces) on the TX Matrix platform and its attached T640 routing nodes.

lcc number — (Routing matrix only) (Optional) Display environmental information about the front panel module (craft interface) on a specified T640 routing node (or line-card chassis) that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.

scc — (Routing matrix only) (Optional) Display environmental information about the front panel module (craft interface) on the TX Matrix platform (or switch-card chassis).

Required Privilege Level

view

List of Sample Output

show chassis environment fpm (M40e and M160)
show chassis environment fpm (M320)
show chassis environment fpm (MX240)
show chassis environment fpm (MX480)
show chassis environment fpm (T-series)
show chassis environment fpm lcc (Routing Matrix)
show chassis environment fpm scc (Routing Matrix)

Output Fields

Table 47 lists the output fields for the show chassis environment fpm command. Output fields are listed in the approximate order in which they appear.

Table 47: show chassis environment fpm Output Fields

Field Name	Field Description
State	FPM status: Online or Offline.
FPM CMB Voltage	(M40e and M160 routers only) Information about the voltage supplied to the FPM chassis management bus (CMB) device. The left column displays the required power, in volts. The right column displays the measured power, in millivolts.
FPM GBUS Voltage	(M320 routers and T-series routing platforms only) Information about the voltage supplied to the FPM generic bus (GBUS) device. The left column displays the required power, in volts. The right column displays the measured power, in millivolts.
FPM Display Voltage	Information about the voltage supplied to the FPM display. The left column displays the required power, in volts. The right column displays the measured power, in millivolts.
FPM CMB Temperature	(M40e and M160 routers only) Temperature of the air flowing past the FPM CMB device
FPM GBUS Temperature	(M320 routers and T-series routing platforms only) Temperature of the air flowing past the FPM GBUS device.
FPM Display Temperature	Temperature of the air flowing past the FPM display.
CMB Revision	(M40e and M160 routers only) Revision level of the CMB device.
GBUS Revision	(M320 routers and T-series routing platforms only) Revision level of the GBUS device.

show chassis environment fpm (M40e and M160)

user@host> show chassis environment fpm

FPM status:
  State                       Online
  FPM CMB Voltage:
    5.0 V bias           5030 mV
    8.0 V bias           8083 mV
  FPM Display Voltage:
    5.0 V bias           4998 mV
  FPM CMB temperature      34 degrees C / 93 degrees F
  FPM Display temperature  35 degrees C / 95 degrees F
  CMB Revision             12

show chassis environment fpm (M320)

user@host> show chassis environment fpm

FPM status:
  State                           Online
  FPM GBUS Voltage:
    5.0 V                    5006 mV
    1.8 V bias               1799 mV
    3.3 V bias               3294 mV
    5.0 V bias               4998 mV
    8.0 V bias               7682 mV
  FPM GBUS temperature         30 degrees C / 86 degrees F
  GBUS Revision                51

show chassis environment fpm (MX240)

user@host> show chassis environment fpm

FPM status:
  State                      Online
  I2CS Revision              41

show chassis environment fpm (MX480)

user@host> show chassis environment fpm

FPM status:
  State                      Online
  I2CS Revision              41

show chassis environment fpm (T-series)

user@host> show chassis environment fpm

FPM status:
  State                           Online
  FPM GBUS Voltage:
    1.8 V bias               1787 mV
    3.3 V bias               3286 mV
    5.0 V bias               4991 mV
    8.0 V bias               7162 mV
  FPM Display Voltage:
    5.0 V                    4996 mV
  FPM GBUS temperature         29 degrees C / 84 degrees F
  FPM Display temperature      26 degrees C / 78 degrees F
  GBUS Revision                37

show chassis environment fpm lcc (Routing Matrix)

user@host> show chassis environment fpm lcc
0

lcc0-re0:
--------------------------------------------------------------------------
FPM status:
  State                           Online
  FPM GBUS Voltage:
    1.8 V bias               1797 mV
    3.3 V bias               3294 mV
    5.0 V bias               5015 mV
    8.0 V bias               7470 mV
  FPM Display Voltage:
    5.0 V                    5018 mV
  FPM GBUS temperature         25 degrees C / 77 degrees F
  FPM Display temperature      29 degrees C / 84 degrees F
  GBUS Revision                37

show chassis environment fpm scc (Routing Matrix)

user@host> show chassis environment fpm scc

scc-re0:
--------------------------------------------------------------------------
FPM status:
  State                           Online
  FPM GBUS Voltage:
    1.8 V bias               1789 mV
    3.3 V bias               3296 mV
    5.0 V bias               5003 mV
    8.0 V bias               7592 mV
  FPM Display Voltage:
    5.0 V                    5010 mV
  FPM GBUS temperature         22 degrees C / 71 degrees F
  FPM Display temperature      27 degrees C / 80 degrees F
  GBUS Revision                37

[Contents] [Prev] [Next] [Index] [Report an Error]