request system partition hard-disk

Syntax

Syntax (Routing Matrix)

Release Information

Command introduced before JUNOS Release 7.4.

Description

Set up the hard disk for partitioning. After this command is issued, the hard disk is partitioned the next time the system is rebooted. When the hard disk is partitioned, the contents of /altroot and /altconfig are saved and restored. All other data on the hard disk is at risk of being lost.

Options

all-lcc — (Routing matrix only) (Optional) Schedule a partition of the hard disk for all T640 routing nodes (or line-card chassis) connected to the TX Matrix platform at their next reboot.

lcc number — (Routing matrix only) (Optional) Schedule a partition of the hard disk on a specific T640 routing node that is connected to a TX Matrix platform at its next reboot. Replace number with a value from 0 through 3.

scc — (Routing matrix only) (Optional) Schedule a partition of the hard disk for the TX Matrix platform (or switch-card chassis).

Additional Information

To immediately partition the hard disk, use the request system reboot command. To cancel the partition request, use the request system partition abort command.

Required Privilege Level

maintenance

Related Topics

request system partition abort

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.