clear system reboot

Syntax

Syntax (Routing Matrix)

Release Information

Command introduced before JUNOS Release 7.4.

Description

Clear any pending system software reboots or halts. When used on a routing matrix without any options, the default behavior clears all pending system software reboots or halts on all T640 routing nodes connected to the TX Matrix platform.

Options

none — Clear all pending system software reboots or halts.

both-routing-engines — (Optional) Clear all halt or reboot requests on both Routing Engines. For a routing matrix, clears both Routing Engines on all chassis connected to the routing matrix.

all-lcc — (Routing matrix only) (Optional) Clear all halt or reboot requests for all T640 routing nodes (or line-card chassis) connected to a TX Matrix platform.

lcc number — (Routing matrix only) (Optional) Clear all halt or reboot requests for a specific T640 routing node (or line-card chassis) that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.

scc — (Routing matrix only) (Optional) Clear all halt or reboot requests for the TX Matrix platform (or switch-card chassis).

Required Privilege Level

maintenance

Related Topics

request system reboot

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

reboot requested by root at Sat Dec 12 19:37:34 1998
[process id 17855]
Terminating...

scc-re0:
--------------------------------------------------------------------------
No shutdown/reboot scheduled.
lcc0-re0:
--------------------------------------------------------------------------
No shutdown/reboot scheduled.
lcc2-re0:
--------------------------------------------------------------------------
No shutdown/reboot scheduled.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.