[Contents] [Prev] [Next] [Index] [Report an Error]

Before You Configure an RSD and Create PSDs

Before connecting the JCS 1200 platform to any T-series routing platform, ensure that the bootROM version for all FPCs on the T-series chassis is ROM Monitor Version 6.4 or later. If an FPC bootROM version is earlier than Version 6.4, the FPC will not come online. To upgrade the firmware, you must contact your Juniper Networks customer support representative. To determine if you need to upgrade the FPC firmware, display the version of the firmware on all FPCs by issuing the show chassis firmware command:

user@host> show chassis firmware

Part                     Type       Version
FPC 0                    ROM        Juniper ROM Monitor Version 7.5b4          
                         O/S        Version 9.1-20080222.0 by builder on 2008-0
FPC 1                    ROM        Juniper ROM Monitor Version 6.4b18         
                         O/S        Version 9.1-20080222.0 by builder on 2008-0
FPC 2                    ROM        Juniper ROM Monitor Version 7.5b4          
                         O/S        Version 9.1-20080222.0 by builder on 2008-0
FPC 4                    ROM        Juniper ROM Monitor Version 6.4b18         
                         O/S        Version 9.1-20080222.0 by builder on 2008-0
FPC 5                    ROM        Juniper ROM Monitor Version 6.4b20         
                         O/S        Version 9.1-20080222.0 by builder on 2008-0
FPC 6                    ROM        Juniper ROM Monitor Version 7.5b4          
                         O/S        Version 9.1-20080222.0 by builder on 2008-0
FPC 7                    ROM        Juniper ROM Monitor Version 6.4b20         
                         O/S        Version 9.1-20080222.0 by builder on 2008-0
SPMB 0                   ROM        Juniper ROM Monitor Version 6.4b18         
                         O/S        Version 9.1-20080222.0 by builder on 2008-0
SPMB 1                   ROM        Juniper ROM Monitor Version 6.4b18         
                         O/S        Version 9.1-20080222.0 by builder on 2008-0

Caution: By default, SNMP is enabled on the JCS management module. Do not disable SNMP. If you disable SNMP, your system might not function correctly.

Before You Configure an RSD and Create PSDs

Related Topics