[Contents] [Prev] [Next] [Index] [Report an Error]

Verifying That Gates Are Running

Purpose

Verify that gates are running on VPG-1.

Action

user@sp-pg-router> show services pgcp
gates gateway vpg-1

Packet gateway configuration:
  Name                                     :  vpg—1              
  IP address                               :  172.16.10.1           
  Port                                     :  2944              
  Status                                   :  In-Service (Registered) 

Gate information:
Gate id: 4295033088          
Gate state:  active 
Action: forward      
Service set id: 1     
Media card: sp-1/2/0                                                
Media handler: vpg1_pgcp-svc-set                                          
Termination-id-string: ip/4/vif-0/2      

Gate id: 4295033089          
Gate state:  active 
Action: forward      
Service set id: 1     
Media card: sp-1/2/0                                                
Media handler: vpg1_pgcp-svc-set                                          
Termination-id-string: ip/4/vif-0/3

Meaning

The show services pgcp gates command lists the gates on the VPG. It shows whether gates are active, disabled, or closed. It also shows the current action being performed on the gate—forward, add, or drop.

[Contents] [Prev] [Next] [Index] [Report an Error]