[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Routing
To view information about routes in a routing table or for information
about OSPF, BGP, RIP, or DLSw, select Monitor>Routing in
the J-Web interface.
The routing information includes information about the route's destination,
protocol, state, and parameters. To view selective information, type or select
information in one or more of the Narrow Search boxes, and click OK.
(See Sample Task—Monitoring Route Information).
Table 13 shows a summary of the information
displayed on Routing pages and the corresponding CLI show commands
you can enter at the J-Web CLI terminal.
Table 13: Routing
Information and Corresponding CLI show Commands
|
Information Displayed
|
Corresponding CLI Command
|
| Route Information
|
|
A high-level summary of the routes in the routing table.
|
show route terse
|
|
Detailed information about the active entries in the routing tables.
|
show route detail
|
| BGP Information
|
|
Summary about Border Gateway Protocol (BGP).
|
show bgp summary
|
|
BGP peers.
|
show bgp neighbor
|
| OSPF Information
|
|
Information about Open Shortest Path First (OSPF) neighbors.
|
show ospf neighbors
|
|
OSPF interfaces.
|
show ospf interfaces
|
|
OSPF statistics.
|
show ospf statistics
|
| RIP Information
|
|
Routing Information Protocol (RIP) statistics about messages sent and
received on an interface, as well as information received from advertisements
from other routing platforms.
|
show rip statistics
|
|
RIP neighbors.
|
show rip neighbors
|
| DLSw Information
(J-series Routing Platforms only) |
|
Data link switching (DLSw) capabilities of a specific remote peer or
all peers.
|
show dlsw capabilities
|
|
Configured DLSw circuits.
|
show dlsw circuits
|
|
DLSw peer status.
|
show dlsw peers
|
|
Media access control (MAC) and IP addresses of remote DLSw peers.
|
show dlsw reachability
|
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
