[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Pseudowires — Filter and Test Pseudowires Dialog Box
Description
Use the Filter and Test Pseudowires dialog box
to filter pseudowires based on one of the many criteria provided and
test them.
Click Provisioning > Pseudowires > Filter and Test
Pseudowires.
Permissions
Superuser
Dialog Elements
The following criteria are available
for filtering pseudowires and displaying results:
- All Pseudowires—Displays all pseudowires.
- Select Device Groups—Displays pseudowires configured
on the selected device groups. Press the Shift key to select multiple
device groups.
- Select Devices—Displays pseudowires configured on
the selected devices. Press the Shift key to select multiple devices.
You must select at least two devices.
- Select Pseudowire Endpoints—Select pseudowire endpoints
from the drop-down list boxes. Displays the pseudowires configured
between the selected endpoints.
- Virtual Circuit ID—Displays the pseudowires with
the Virtual Circuit ID you enter.
OK button—Click OK after specifying the
filtering criterion to display results.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
