[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
MPLS/GRE Tunnel Provisioning — Add/Edit/Delete MPLS/GRE
Tunnels Dialog Box
Description
MPLS/GRE Tunnel Provisioning wizard has four steps,
of which Add/Edit/Delete MPLS/GRE Tunnels is the second step. Use
the Add/Edit/Delete dialog box to enter tunnel details or modify them,
or delete a tunnel.
Click Provisioning > MPLS/GRE Tunnels > MPLS/GRE
Tunnel Provisioning, and then click Next in the Select Device dialog
box after entering the details.
Permissions
Superuser
Dialog Elements
Tunnel Type drop-down list box—Select
a tunnel type from MPLS-RSVP, MPLS-LDP, and GRE.
Source Device drop-down list box—Select a source
device for the MPLS/GRE tunnel.
Destination Device drop-down list box—Select
a destination device for the MPLS/GRE tunnel.
Provide Source Endpoint Details: allows
you to specify details such as LSP path and bandwidth for the source
device.
- LSP Name—Enter the LSP name for the source device.
This is required only for MPLS-RSVP.
- LSP Bandwidth—Enter the LSP bandwidth for the source
device.
- Select a Primary Path—Select a primary path from
the drop-down list box. This is required only for MPLS-RSVP.
- Select a Secondary Path—Select a secondary path
from the drop-down list box. This is required only for MPLS-RSVP.
- Setup Priority—Select a setup priority from the
drop-down list box.
- Reservation Priority—Select a reservation priority
from the drop-down list box.
- QOS Priority—Select a QOS priority from the drop-down
list box.
- Enable Fast Reroute—Select this check box to enable
fast reroute. This is applicable only to MPLS-RSVP.
- Maximum Hop Count—Enter the maximum number of hops,
if the tunnel type is MPLS-RSVP, and you have selected the Enable
Fast Reroute check box.
- Enable Node Link Protection—Select this check box
to enable node link protection.
- Enable Link Protection—Select this check box to
enable link protection.
- Select GRE Interface—Select an interface from the
drop-down list box if the tunnel type you selected is GRE.
- Logical Unit—Enter the logical unit of the GRE interface
if the tunnel type you selected is GRE.
Provide Destination Endpoint Details: allows you to specify details such as LSP path and bandwidth for
the destination device.
- Copy Source Endpoint Details—Select this check box
if you wish to copy the source endpoint details for the destination
endpoint.
- LSP Name—Enter the LSP name for the destination
device. This is required only for MPLS-RSVP.
- LSP Bandwidth—Enter the LSP bandwidth for the destination
device.
- Select a Primary Path—Select a primary path from
the drop-down list box. This is required only for MPLS-RSVP.
- Select a Secondary Path—Select a secondary path
from the drop-down list box. This is required only for MPLS-RSVP.
- Setup Priority—Select a setup priority from the
drop-down list box.
- Reservation Priority—Select a reservation priority
from the drop-down list box.
- QOS Priority—Select a QOS priority from the drop-down
list box.
- Enable Fast Rerout—Select this check box to enable
fast reroute. This is applicable only to MPLS-RSVP.
- Maximum Hop Count—Enter the maximum number of hops,
if the tunnel type is MPLS-RSVP, and you have selected the Enable
Fast Reroute check box.
- Enable Node Link Protection—Select this check box
to enable node link protection.
- Enable Link Protection—Select this check box to
enable link protection.
- Select GRE Interface—Select an interface from the
drop-down list box if the tunnel type you selected is GRE.
- Logical Unit—Enter the logical unit of the GRE interface
if the tunnel type you selected is GRE.
Add Entry button—Click this to add the
tunnel or save modifications.
Edit button—Click this to make modifications
to the tunnel details.
Delete button—Click this to delete the tunnel.
Force Deploy button—Click this to push the configuration
details to the devices even if you have not modified them.
Previous button—Click this to go to step 1: Select
Device dialog box.
Next button—Click this to go to step 3: Confirm
Add/Edit/Delete MPLS/GRE Tunnels dialog box.
The tabular area at the bottom of the dialog box
displays the tunnels configured between the devices selected in step
1: Select Devices:
- Select—Select a check box to edit the tunnel or
delete it.
- State—New (blue), Modified (Red), and Unchanged
(Green)
- Tunnel Type—Displays the tunnel type.
- Source Device—Dispays the source device name.
- Source LSP—Displays the source LSP path for MPLS-RSVP
tunnels.
- Source GRE Intf—Displays the source GRE interface
for GRE tunnels.
- Destination Device—Dispays the destination device
name.
- Destination LSP—Displays the destination LSP path
for MPLS-RSVP tunnels.
- Destination GRE Intf—Displays the destination GRE
interface for GRE tunnels.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
