Copying a RADIUS Configuration

You can copy an existing RADIUS configuration record using the RADIUS Configuration Entry dialog box. To save the copied RADIUS configuration, you must change either the RADIUS server DNS name or the IP address and port number.

To copy a RADIUS configuration, follow these steps:

1. Log in to JUNOScope with superuser permissions.
2. Click Settings >RADIUS Configuration. The RADIUS Configuration dialog box appears.
3. Select the RADIUS configuration record that you want to copy.
4. Click Copy. The Add RADIUS Configuration dialog box appears.
5. Type the RADIUS server host DNS name or IP address in the text box. The name must be less than 40 characters.
6. Type the RADIUS server port number in the text box. The default port number is 1812. The port number value must be between 1 and 65,535.
7. Type the RADIUS accounting port number in the text box. The accounting port is the port from which the JUNOScope software maintains a record of the loggable activities that a user has performed. The default port number is 1813. The port number value must be between 1 and 65,535.

   The RADIUS server port and the RADIUS accounting ports are optional; however you must supply at least one of them.

8. Type the RADIUS server secret in the text box. The secret must be less than
   40 characters.
9. Type the RADIUS server secret again to confirm it.
10. Click OK. The copied RADIUS configuration record is added in the RADIUS Configuration dialog box.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.