Configuring Transfer on Commit

You can enable transfer-on-commit on selected devices. Configure your JUNOScope server for transfer-on-commit before enabling transfer-on commit on devices. You must have superuser or read-write permission to enable transfer-on-commit.

To configure transfer on commit on selected devices, follow these steps:

1. In the JUNOScope main window, click Configuration > Repository > Transfer on Commit > Configure Transfer on Commit. The Select Group or Device(s) dialog box appears.

   

2. Select the group or device(s) on which you want to configure transfer-on-commit.
3. Click Next. The Confirm Selections dialog box appears.

   

4. Confirm that the selections for performing the transfer-on-commit operation are correct and click Finish. The View Status Records dialog box shows the status of the transfer-on-commit operation.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.