[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring the JUNOScope Server for Transfer on Commit
You can configure a JUNOS device to transfer its device configuration
to the JUNOScope server when a commit operation succeeds. This feature
ensures that the running configuration on the device is always archived
in JUNOScope. You should configure the JUNOScope server for transfer-on-commit
before configuring transfer-on-commit on devices. You must have superuser
permissions to configure the JUNOScope server for transfer-on-commit.
To configure the JUNOScope server for transfer-on-commit, follow
these steps:
- In the JUNOScope main window, click Home>Settings >Transfer
on Commit. The Archive Site dialog box appears.
- Enter the directory to which the configuration will be
transferred in the JUNOScope Server Directory text box.
- Enter the credentials used by the device to connect to
the server in the User Name and Password text boxes. This JUNOScope
user and the JUNOScope administrator need read-write permission to
the directory to which the configuration will be transferred.
- Select the protocol used for connecting to the server
from the Protocol drop-down list box. You can choose the scp or ftp
protocol. To use the scp protocol, the ssh daemon must be running
on the JUNOScope server.
- Select the default ports for the protocol selected or
enter a port to use for connecting to the server in the Port text
box. The default ports are port 21 for ftp and port 22 for scp.
- Select the key type and public key details required for
connecting using the scp protocol.
- Select whether to use the DNS name or IP address to connect
to the JUNOScope server.
- Schedule the archive site scanning operation.
- Click OK to configure the archive site. Click Reset to
discard your changes.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
