Configure LSP Paths—Edit Details Of LSP Path Dialog Box

Use the Configure LSP Paths — Edit Details of LSP Path dialog box to modify details of LSP paths which will be used in creating MPLS/GRE tunnels.

Click Provisioning > MPSL/GRE Tunnels > Configure LSP Paths, and then click the LSP path name.

Superuser

Device Name—Display only.

Name—Display only.

Comment—Enter a comment on the LSP path.

Enter a Node—Enter node information (IP addresses and adjacency) of the LSP path.

Enter IP Address—Enter the IP address of the node.
Strict/Loose adjacency—Select from the drop-down list whether the node is to follow strict or loose adjacency.

Add button—Click this button to add the node to the LSP path.

Next Hop—Displays the nodes you have added.

Remove button—Select a node and click Remove to remove that node from the LSP path.

Remove All button—Click Remove All to remove all nodes from the LSP path.

Move Up button—Select a node and click Move Up to move it up in the path.

Move Down button—Seclect a node and click Move Down to move it down in the path.

Save button—Saves the LSP path you have added.

Reset button—Resets the information you have entered.

Cancel button—Takes you to the previous dialog box (Configure LSP Paths).