Adding Authentication Information

To add additional authentication information, follow these steps:

1. From the JUNOScope main window, click Settings > Authentication Information. The Authentication Information dialog box appears.
2. Click Add. The Add Authentication Information dialog box appears.
3. In the Authentication Information Name text box, type a name for the authentication information. This name will be listed in the Authentication Information drop-down list box in the Add Access Methods dialog box.
4. In the Username text box, type a user login name that is configured on the router. This must be the username of a valid user on the router.
5. In the Password text box, type a user password that is configured on the router. This must be the password of a valid user on the router.
6. In the Confirm Password text box, retype the user password to confirm it.
7. Click OK. The Authentication Information dialog box appears with the new authentication information listed.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.