Adding a RADIUS Configuration in JUNOScope

To add RADIUS server host information to JUNOScope, follow these steps:

Log in to JUNOScope with superuser permissions.
In JUNOScope, click Settings > RADIUS Configuration. The RADIUS Configuration dialog box appears. The message “No RADIUS configuration present” appears if you have not previously added a RADIUS configuration.
Click Add. The Add RADIUS Configuration dialog box appears.
Type the RADIUS server host DNS name or IP address in the text box. The name must be less than 40 characters.
Type the RADIUS server port number in the text box. The default port number is 1812. The port number value must be between 1 and 65,535.
Type the RADIUS accounting port number in the text box. The accounting port is the port from which the JUNOScope software maintains a record of the loggable activities that a user has performed. The default port number is 1813. The port number value must be between 1 and 65,535.
The RADIUS server port and the RADIUS accounting ports are optional, however, you must supply at least one of them.
Type the RADIUS server secret in the text box. The secret must be less than
40 characters.
Type the RADIUS server secret again to confirm it.
Click OK. The RADIUS configuration record is listed in the RADIUS Configuration dialog box by RADIUS server DNS name or IP address and RADIUS server port number.