<physical-interface>
Usage
<interface-information | interface-filter-information | interface-policer-information><physical-interface><name>name</name><admin-status>admin-status</admin-status><oper-status>oper-status</oper-status><local-index>local-index</local-index><snmp-index>snmp-index</snmp-index><generation>generation</generation><description>description</description><if-type>if-type</if-type><link-level-type>link-level-type</link-level-type><mtu>mtu</mtu><link-mode>link-mode</link-mode><speed>speed</speed><max-speed>max-speed</max-speed><duplex>duplex</duplex><clocking>clocking</clocking><sonet-mode>sonet-mode</sonet-mode><physical-mode>physical-mode</physical-mode><l2circuit-mode>l2circuit-mode</l2circuit-mode><ifd-cell-bundle-size>ifd-cell-bundle-size</ifd-cell-bundle-size><ifd-cell-bundle-timeout>ifd-cell-bundle-timeout</ifd-cell-bundle-timeout><loopback>loopback</loopback><ih-parent>ih-parent</ih-parent><atm-line-build-out>atm-line-build-out</atm-line-build-out><atm-encapsulation>atm-encapsulation</atm-encapsulation><atm-e3-framing>atm-e3-framing</atm-e3-framing><sonet-loopback>sonet-loopback</sonet-loopback><crc>crc</crc><payload-scrambler>payload-scrambler</payload-scrambler><ingress-rate-limit>ingress-rate-limit</ingress-rate-limit><source-filtering>source-filtering</source-filtering><if-flow-control>if-flow-control</if-flow-control><bpdu-error>bpdu-error</bpdu-error><l2pt-error>l2pt-error</l2pt-error><if-unidirectional>if-unidirectional</if-unidirectional><if-auto-negotiation>if-auto-negotiation</if-auto-negotiation><if-remote-fault>if-remote-fault</if-remote-fault><minimum-links-in-aggregate>minimum-links-in-aggregate</minimum-links-in-aggregate><minimum-bandwidth-in-aggregate>minimum-bandwidth-in-aggregate</minimum-bandwidth-in-aggregate><if-device-flags>...</if-device-flags><if-config-flags>...</if-config-flags><shared-uplink-physical-interface>...</shared-uplink-physical-interface><link-type>link-type</link-type><if-media-flags>...</if-media-flags><optics-properties>...</optics-properties><keepalive-config>...</keepalive-config><lmi-dce-config>...</lmi-dce-config><lmi-dte-config>...</lmi-dte-config><queue-counters>...</queue-counters><keepalive-statistics>...</keepalive-statistics><ppp-flags>...</ppp-flags><lcp-state>lcp-state</lcp-state><ncp-information>...</ncp-information><chap-state>chap-state</chap-state><pap-state>pap-state</pap-state><physical-information>physical-information</physical-information><es-ifd-stats>...</es-ifd-stats><up-hold-time>up-hold-time</up-hold-time><down-hold-time>down-hold-time</down-hold-time><current-physical-address>current-physical-address</current-physical-address><hardware-physical-address>hardware-physical-address</hardware-physical-address><alternate-physical-address>alternate-physical-address</alternate-physical-address><interface-flapped>interface-flapped</interface-flapped><statistics-cleared>statistics-cleared</statistics-cleared><preserve-interface>preserve-interface</preserve-interface><preserve-interface-statistics>...</preserve-interface-statistics><traffic-statistics>...</traffic-statistics><ingress-traffic-statistics>...</ingress-traffic-statistics><multilink-interface-errors>...</multilink-interface-errors><mlfr-uni-nni-bundle-options>...</mlfr-uni-nni-bundle-options><multilink-bundle-errors>...</multilink-bundle-errors><input-error-list>...</input-error-list><input-error-count>input-error-count</input-error-count><output-error-list>...</output-error-list><output-error-count>output-error-count</output-error-count><ber-threshold>...</ber-threshold><ds1-crc-alarm-threshold>...</ds1-crc-alarm-threshold><active-alarms>...</active-alarms><active-defects>...</active-defects><sonet-errors>...</sonet-errors><sonet-physical-information>...</sonet-physical-information><sonet-section-information>...</sonet-section-information><sonet-line-information>...</sonet-line-information><sonet-path-information>...</sonet-path-information><sonet-payload-pointer-information>...</sonet-payload-pointer-information><sonet-payload-pointer-curptr>sonet-payload-pointer-curptr</sonet-payload-pointer-curptr><sonet-payload-pointer-ptrinc-count>sonet-payload-pointer-ptrinc-count</sonet-payload-pointer-ptrinc-count><sonet-payload-pointer-ptrdec-count>sonet-payload-pointer-ptrdec-count</sonet-payload-pointer-ptrdec-count><sonet-payload-pointer-newptr-ndf-count>sonet-payload-pointer-newptr-ndf-count</sonet-payload-pointer-newptr-ndf-count><sonet-vt-information>...</sonet-vt-information><sonet-rx-overhead>sonet-rx-overhead</sonet-rx-overhead><sonet-tx-overhead>sonet-tx-overhead</sonet-tx-overhead><sonet-rx-path-trace>sonet-rx-path-trace</sonet-rx-path-trace><sonet-tx-path-trace>sonet-tx-path-trace</sonet-tx-path-trace><otn-errors>...</otn-errors><otn-rx-overhead>otn-rx-overhead</otn-rx-overhead><otn-tx-overhead>otn-tx-overhead</otn-tx-overhead><otn-fec-statistics>...</otn-fec-statistics><media-information>...</media-information><ethernet-pcs-statistics>...</ethernet-pcs-statistics><ethernet-mac-statistics>...</ethernet-mac-statistics><ethernet-filter-statistics>...</ethernet-filter-statistics><ethernet-autonegotiation>...</ethernet-autonegotiation><link-partner-status>link-partner-status</link-partner-status><local-info>...</local-info><mac-database>...</mac-database><dsl-information>...</dsl-information><shdsl-information>...</shdsl-information><atm-information>...</atm-information><modem-information>...</modem-information><serial-information>...</serial-information><virtual-path-information>...</virtual-path-information><ct3-information>...</ct3-information><cds1-information>...</cds1-information><nxds0-information>...</nxds0-information><ds3-mode>ds3-mode</ds3-mode><ds3-long-buildout>ds3-long-buildout</ds3-long-buildout><e3-framing>e3-framing</e3-framing><ds1-framing>ds1-framing</ds1-framing><dsu-information>...</dsu-information><ds3-bert-information>...</ds3-bert-information><e3-bert-information>...</e3-bert-information><ds1-bert-information>...</ds1-bert-information><ds0-bert-information>...</ds0-bert-information><hdlc-information>...</hdlc-information><pfe-information>...</pfe-information><logical-interface>...</logical-interface><links>...</links><peer-configuration-status>...</peer-configuration-status><lmi-statistics>...</lmi-statistics><lsi-traffic-statistics>...</lsi-traffic-statistics><stp-traffic-statistics>...</stp-traffic-statistics><chassis-queue-counters>...</chassis-queue-counters><ingress-queue-counters>...</ingress-queue-counters><otn-oc-information>...</otn-oc-information><otn-otu-information>...</otn-otu-information><otn-odu-information>...</otn-odu-information><satop-information>...</satop-information><cesopsn-information>...</cesopsn-information><cos-information>...</cos-information><physical-interface-cos-information>...</physical-interface-cos-information><mlfr-uni-nni-traffic-statistics>...</mlfr-uni-nni-traffic-statistics><interval-information>...</interval-information></physical-interface></interface-information | interface-filter-information | interface-policer-information>Description
Information about a single physical interface.
Contents
<active-alarms>—Media-specific defects that can render the interface unable to pass packets. When a defect persists for a certain amount of time, it is promoted to an alarm. Based on the router configuration, an alarm can ring the red or yellow alarm bell on the router, or the red or yellow alarm LED on the craft interface.
<active-defects>—Media-specific defects that can render the interface unable to pass packets. When a defect persists for a certain amount of time, it is promoted to an alarm. Based on the router configuration, an alarm can ring the red or yellow alarm bell on the router, or the red or yellow alarm LED on the craft interface.
<admin-status>—Desired state of the interface.
<alternate-physical-address>—Alternate physical address for this interface.
<atm-e3-framing>—Type of framing.
<atm-encapsulation>—Type of ATM encapsulation.
<atm-information>—Operational information and statistics for ATM interfaces.
<atm-line-build-out>—Line buildout.
<ber-threshold>—Bit error rate (BER) threshold for SONET interface.
<bpdu-error>—No documentation is available yet.
<cds1-information>—No documentation is available yet.
<cesopsn-information>—No documentation is available yet.
<chap-state>—State of the Challenge Handshake Authentication Protocol.
<chassis-queue-counters>—Chassis queue counter statistics.
<clocking>—Reference clock source.
<cos-information>—Information about class-of-service configuration.
<crc>—Frame checksum on the interface (either 16 or 32).
<ct3-information>—No documentation is available yet.
<current-physical-address>—Configured physical address for this interface.
<description>—Description of this interface.
<down-hold-time>—Down hold-time for this interface (milliseconds).
<ds0-bert-information>—DS0 BERT configuration and statistics.
<ds1-bert-information>—DS1 BERT configuration and statistics.
<ds1-crc-alarm-threshold>—DS1 CRC alarm thresholds.
<ds1-framing>—No documentation is available yet.
<ds3-bert-information>—DS3 BERT configuration and statistics.
<ds3-long-buildout>—No documentation is available yet.
<ds3-mode>—No documentation is available yet.
<dsl-information>—Operational information and statistics for ADSL interfaces.
<dsu-information>—DSU configuration and statistics.
<duplex>—Duplex at which the interface is running.
<e3-bert-information>—E3 BERT configuration and statistics.
<e3-framing>—No documentation is available yet.
<es-ifd-stats>—ES PIC statistics.
<ethernet-autonegotiation>—Ethernet autonegotiation information.
<ethernet-filter-statistics>—Ethernet filter statistics.
<ethernet-mac-statistics>—Ethernet MAC statistics.
<ethernet-pcs-statistics>—Ethernet PCS statistics.
<generation>—Generation number used to distinguish between successive instances of this interface.
<hardware-physical-address>—Hardware physical address for this interface.
<hdlc-information>—No documentation is available yet.
<if-auto-negotiation>—Status of auto-negotiation.
<if-config-flags>—No documentation is available yet.
<if-device-flags>—No documentation is available yet.
<if-flow-control>—No documentation is available yet.
<if-media-flags>—No documentation is available yet.
<if-remote-fault>—Status of remote fault.
<if-type>—No documentation is available yet.
<if-unidirectional>—No documentation is available yet.
<ifd-cell-bundle-size>—Cell bundle size for physical interface.
<ifd-cell-bundle-timeout>—Cell bundle timeout for physical interface.
<ih-parent>—Controller parent.
<ingress-queue-counters>—Ingress queue counter statistics.
<ingress-rate-limit>—Layer 2 rate limit on ingress traffic for the port.
<ingress-traffic-statistics>—Number and rate of bytes and packets received in the ingress side at Packet Forwarding Engine.
<input-error-count>—Sum of all input errors on this interface.
<input-error-list>—Input errors on this interface.
<interface-flapped>—Time when the interface last flapped.
<interval-information>—No documentation is available yet.
<keepalive-config>—Configured keepalive settings on this interface.
<keepalive-statistics>—Keepalive statistics for this interface.
<l2circuit-mode>—Indicates if the interface is in L2 circuit AAL5 or Cell mode.
<l2pt-error>—No documentation is available yet.
<lcp-state>—State of the Line Control Protocol.
<link-level-type>—Encapsulation being used on the physical interface.
<link-mode>—Link mode of the interface.
<link-partner-status>—Auto-negotiation status of link partner.
<link-type>—No documentation is available yet.
<links>—Aggregated SONET/SDH link information.
<lmi-dce-config>—Configured LMI DCE setting on this interface.
<lmi-dte-config>—Configured LMI DTE setting on this interface.
<lmi-statistics>—LMI statistics for an interface.
<local-index>—Local kernel index for this interface.
<local-info>—Auto-negotiation status of local partner.
<logical-interface>—Information about a single logical interface.
<loopback>—Whether loopback is enabled and the type of loopback.
<lsi-traffic-statistics>—Information about label-switched bytes and packets received on the physical interface.
<mac-database>—No documentation is available yet.
<max-speed>—Maximum speed at which interface can run.
<media-information>—Information about media alarms.
<minimum-bandwidth-in-aggregate>—Minimum bandwidth needed for the bundle to be up.
<minimum-links-in-aggregate>—Minimum number of links needed for the bundle to be up.
<mlfr-uni-nni-bundle-options>—No documentation is available yet.
<mlfr-uni-nni-traffic-statistics>—No documentation is available yet.
<modem-information>—Operational information for MODEM interfaces.
<mtu>—MTU size on this interface.
<multilink-bundle-errors>—Multilink bundle errors.
<multilink-interface-errors>—No documentation is available yet.
<ncp-information>—Network Control Protocol information.
<nxds0-information>—No documentation is available yet.
<oper-status>—Current operational state of the interface.
<optics-properties>—Optics properties.
<otn-errors>—No documentation is available yet.
<otn-fec-statistics>—No documentation is available yet.
<otn-oc-information>—No documentation is available yet.
<otn-odu-information>—No documentation is available yet.
<otn-otu-information>—No documentation is available yet.
<otn-rx-overhead>—No documentation is available yet.
<otn-tx-overhead>—No documentation is available yet.
<output-error-count>—Sum of all output errors on this interface.
<output-error-list>—Output errors on this interface.
<pap-state>—State of the Password Authentication Protocol.
<payload-scrambler>—Whether payload scrambling is enabled.
<peer-configuration-status>—Nonmatching DCE end DLCIs.
<pfe-information>—Information about Packet Forwarding Engine configuration.
<physical-information>—No documentation is available yet.
<physical-interface-cos-information>—Physical interface class-of-service parameters.
<physical-mode>—Physical mode.
<ppp-flags>—Additional flags applicable to PPP encapsulation.
<preserve-interface>—Whether interface preservation is enabled or disabled.
<preserve-interface-statistics>—Interface switchover statistics.
<queue-counters>—Queue counter statistics.
<satop-information>—No documentation is available yet.
<serial-information>—Serial interfaces information and statistics.
<shared-uplink-physical-interface>—Shared uplink physical interface.
<shdsl-information>—Operational information and statistics for SHDSL interfaces.
<snmp-index>—SNMP ifIndex for this interface.
<sonet-errors>—No documentation is available yet.
<sonet-line-information>—No documentation is available yet.
<sonet-loopback>—SONET loopback setting on channelized OC12 interface.
<sonet-mode>—Whether the interface is in SDH or SONET mode.
<sonet-path-information>—No documentation is available yet.
<sonet-payload-pointer-curptr>—Value of the SONET/SDH payload pointer, derived from the H1 and H2 overhead bytes.
<sonet-payload-pointer-information>—No documentation is available yet.
<sonet-payload-pointer-newptr-ndf-count>—Number of times a new payload pointer was created with the New Data Found flag set.
<sonet-payload-pointer-ptrdec-count>—Number of times the value of the SONET/SDH payload pointer had negative justification.
<sonet-payload-pointer-ptrinc-count>—Number of times the value of the SONET/SDH payload pointer had positive justification.
<sonet-physical-information>—No documentation is available yet.
<sonet-rx-overhead>—No documentation is available yet.
<sonet-rx-path-trace>—Received SONET path trace.
<sonet-section-information>—No documentation is available yet.
<sonet-tx-overhead>—No documentation is available yet.
<sonet-tx-path-trace>—Transmitted SONET path trace.
<sonet-vt-information>—No documentation is available yet.
<source-filtering>—Whether source filtering is enabled or disabled.
<speed>—Speed at which the interface is running.
<statistics-cleared>—Time when statistics were last cleared.
<stp-traffic-statistics>—Information about dropped bytes and packets due to STP state.
<traffic-statistics>—Number and rate of bytes and packets received and transmitted on the physical interface.
<up-hold-time>—Up hold-time for this interface (milliseconds).
<virtual-path-information>—Operational information and statistics for a virtual path.