<vrrp-interface>
Usage
<vrrp-information>
<vrrp-interface>
<groups>groups</groups>
<active>active</active>
<physical-interface>physical-interface</physical-interface>
<interface>interface</interface>
<address>address</address>
<interface-state>interface-state</interface-state>
<group>group</group>
<vrrp-state>vrrp-state</vrrp-state>
<timer-name>timer-name</timer-name>
<timer-value>timer-value</timer-value>
<local-interface-address>local-interface-address</local-interface-address>
<vrrp-vlan>...</vrrp-vlan>
<bandwidth>...</bandwidth>
<group-vrrp-pdu-statistics>...</group-vrrp-pdu-statistics>
<group-vrrp-pdu-error-statistics>...</group-vrrp-pdu-error-statistics>
<group-vrrp-state-transition-statistics>...
</group-vrrp-state-transition-statistics>
<preempt-hold>...</preempt-hold>
<virtual-ip-address>virtual-ip-address</virtual-ip-address>
<unit>unit</unit>
<index>index</index>
<interface-index>interface-index</interface-index>
<snmp-interface-index>snmp-interface-index</snmp-interface-index>
<vrrp-traps>vrrp-traps</vrrp-traps>
<group-priority>group-priority</group-priority>
<advertisement-interval>advertisement-interval</advertisement-interval>
<authentication-type>authentication-type</authentication-type>
<delay-threshold>delay-threshold</delay-threshold>
<computed-send-rate>computed-send-rate</computed-send-rate>
<preempt>preempt</preempt>
<accept-data-mode>accept-data-mode</accept-data-mode>
<vip-count>vip-count</vip-count>
<vip>vip</vip>
<dead-timer>dead-timer</dead-timer>
<master-priority>master-priority</master-priority>
<master-router-ip>master-router-ip</master-router-ip>
<master-router>master-router</master-router>
<router-ip>router-ip</router-ip>
<virtual-router-uptime>virtual-router-uptime</virtual-router-uptime>
<master-router-uptime>master-router-uptime</master-router-uptime>
<virtual-mac>virtual-mac</virtual-mac>
<tracking>tracking</tracking>
<preempt-hold-time>preempt-hold-time</preempt-hold-time>
<current-priority>current-priority</current-priority>
<configured-priority>configured-priority</configured-priority>
<priority-hold-time>priority-hold-time</priority-hold-time>
<remaining-time>remaining-time</remaining-time>
<pending-priority>pending-priority</pending-priority>
<interface-tracking-state>interface-tracking-state</interface-tracking-state>
<interface-count>interface-count</interface-count>
<route-tracking-state>route-tracking-state</route-tracking-state>
<route-count>route-count</route-count>
<interface-speed>interface-speed</interface-speed>
<current-priority-cost>current-priority-cost</current-priority-cost>
<tracked-interface>tracked-interface</tracked-interface>
<track-route-node-information>...</track-route-node-information>
<track-vrrpd-interface>...</track-vrrpd-interface>
<track-route-entry>...</track-route-entry>
<vrrp-message>...</vrrp-message>
<invalid-ipah-next-type-received>invalid-ipah-next-type-received
</invalid-ipah-next-type-received>
<invalid-vrrp-ttl-value-received>invalid-vrrp-ttl-value-received
</invalid-vrrp-ttl-value-received>
<invalid-vrrp-version-received>invalid-vrrp-version-received
</invalid-vrrp-version-received>
<invalid-vrrp-pdu-type-received>invalid-vrrp-pdu-type-received
</invalid-vrrp-pdu-type-received>
<invalid-vrrp-authentication-type-received>invalid-vrrp-authentication-type-received
</invalid-vrrp-authentication-type-received>
<invalid-vrrp-ip-count-received>invalid-vrrp-ip-count-received
</invalid-vrrp-ip-count-received>
<invalid-vrrp-checksum-received>invalid-vrrp-checksum-received
</invalid-vrrp-checksum-received>
<advertisement-timer>advertisement-timer</advertisement-timer>
<packets-received>packets-received</packets-received>
<no-group-match-received>no-group-match-received</no-group-match-received>
<advertisement-sent>advertisement-sent</advertisement-sent>
<advertisement-received>advertisement-received</advertisement-received>
</vrrp-interface>
</vrrp-information>
Description
Describes vrrp interface.
Contents
<accept-data-mode>—Accept packets destined for the virtual IP address.
<active>—Total number of VRRP groups that are active.
<address>—Address of the physical interface.
<advertisement-interval>—Advertisement interval for sending advertisement packets.
<advertisement-received>—Number of VRRP advertisement PDUs received from an interface.
<advertisement-sent>—Number of VRRP advertisement that the interface has transmitted.
<advertisement-timer>—How long, in seconds, until the advertisement timer expires.
<authentication-type>—Configured VRRP authentication type(none, simple, or md5).
<bandwidth>—Display bandwidth parameters.
<computed-send-rate>—The advertisement send rate in packets per second.
<configured-priority>—Priority configured to track an interface of a virtual router.
<current-priority>—The current VRRP priority for the VRID.
<current-priority-cost>—Current cost to lower the priority of the VRRP master.
<dead-timer>—How long until the Master Is Dead.
<delay-threshold>—Number of advertisemnt timer drifted beyond threshold.
<group>—Identifies the VRRP group.(0-255).
<group-priority>—Value used to elect the master virtual router in the VRRP group.
<group-vrrp-pdu-error-statistics>—Errored statistics for the VRRP group.
<group-vrrp-pdu-statistics>—Number of VRRP advertisements sent and received by the group.
<group-vrrp-state-transition-statistics>—State transition statistics for the VRRP group.
<groups>—Total number of VRRP groups configured on the interface.
<index>—Physical interface's index number(initialization sequence).
<interface>—Name of the logical interface.
<interface-count>—Number of tracked interfaces.
<interface-index>—Interface index.
<interface-speed>—The speed on an physical interface.
<interface-state>—State of the interface.
<interface-tracking-state>—State of the interface being tracked.
<invalid-ipah-next-type-received>—Number of packets received that use IPAH.
<invalid-vrrp-authentication-type-received>—Packets received with invalid VRRP authentication type.
<invalid-vrrp-checksum-received>—Packets received with invalid VRRP checksum.
<invalid-vrrp-ip-count-received>—Number of packets received whose VRRP IP count exceeds 8.
<invalid-vrrp-pdu-type-received>—Number of packets received whose VRRP PDU type is not 1.
<invalid-vrrp-ttl-value-received>—Number of packets received whose IP TTL value is not 255.
<invalid-vrrp-version-received>—Number of packets received whose VRRP version is not 2.
<local-interface-address>—Local interface address.
<master-priority>—Priority value of the router acting as the master.
<master-router>—IP address of the interface that is acting as the master.
<master-router-ip>—IP address of the interface that is acting as the master.
<master-router-uptime>—How long, in seconds, that the master router has been up.
<no-group-match-received>—Packets received for nonexistant VRRP groups on the interface.
<packets-received>—Number of VRRP packets received for VRRP groups on the interface.
<pending-priority>—Priority to decrease if incoming VRRP packet priority is higher.
<physical-interface>—Name of the physical interface.
<preempt>—Allow the master router to be preempted.
<preempt-hold>—Display preempt related parameters.
<preempt-hold-time>—Seconds before a backup router preempts the master router.
<priority-hold-time>—Time that must elapse between dynamic priority changes.
<remaining-time>—Predicts the time remaining before it becomes master.
<route-count>—Number of tracked IP routes.
<route-tracking-state>—State of the route being tracked.
<router-ip>—IP address of the router.
<snmp-interface-index>—SNMP index number for the physical interface.
<timer-name>—VRRP timer name.
<timer-value>—VRRP timer information.
<track-route-entry>—Route Tracking entry table.
<track-route-node-information>—Display route tracking details.
<track-vrrpd-interface>—Display VRRP interface tracking details.
<tracked-interface>—VRRP tracked name and unit number.
<tracking>—Whether tracking is enabled or disabled.
<unit>—Logical unit number.
<vip>—List of virtual IP addresses configured on the interface.
<vip-count>—Number of virtual IP addresses configured on the interface.
<virtual-ip-address>—Virtual Router IP Address .
<virtual-mac>—MAC address associated with the virtual IP address.
<virtual-router-uptime>—How long, in seconds, that the virtual router has been up.
<vrrp-message>—Display vrrp message.
<vrrp-state>—VRRP state information.
<vrrp-traps>—Status of VRRP traps: Enabled or Disabled.
<vrrp-vlan>—Display vrrp when configured on vlan.