<mpls-lsp-path>

Usage

<mpls-lsp>
    <mpls-lsp-path>
        <path-active/>
        <title>title</title>
        <name>name</name>
        <path-state>path-state</path-state>
        <cos>cos</cos>
        <no-decrement-ttl/>
        <preference>preference</preference>
        <path-soft-preemption-pending/>
        <setup-priority>setup-priority</setup-priority>
        <hold-priority>hold-priority</hold-priority>
        <bandwidth>bandwidth</bandwidth>
        <actual-bandwidth>actual-bandwidth</actual-bandwidth>
        <per-class-bandwidth-heading>per-class-bandwidth-heading
                                    </per-class-bandwidth-heading>
        <bandwidth_ct0>bandwidth_ct0</bandwidth_ct0>
        <bandwidth_ct1>bandwidth_ct1</bandwidth_ct1>
        <bandwidth_ct2>bandwidth_ct2</bandwidth_ct2>
        <bandwidth_ct3>bandwidth_ct3</bandwidth_ct3>
        <path-adaptive/>
        <path-no-recordroute/>
        <hoplimit>hoplimit</hoplimit>
        <optimize-timer>optimize-timer</optimize-timer>
        <smart-optimize-timer>smart-optimize-timer</smart-optimize-timer>
        <admin-groups>...</admin-groups>
        <retry-timer>retry-timer</retry-timer>
        <retry-limit>retry-limit</retry-limit>
        <cspf-status>cspf-status</cspf-status>
        <explicit-route>...</explicit-route>
        <received-rro>received-rro</received-rro>
        <oam-state>oam-state</oam-state>
        <path-history>...</path-history>
        <path-available-bandwidth>...</path-available-bandwidth>
        <layer2-connection>...</layer2-connection>
    </mpls-lsp-path>
</mpls-lsp>

Description

Primary or secondary LSP path.

Contents

<actual-bandwidth>—No documentation is available yet.

<admin-groups>—No documentation is available yet.

<bandwidth>—No documentation is available yet.

<bandwidth_ct0>—No documentation is available yet.

<bandwidth_ct1>—No documentation is available yet.

<bandwidth_ct2>—No documentation is available yet.

<bandwidth_ct3>—No documentation is available yet.

<cos>—CoS value.

<cspf-status>—Status returned by CSPF computation.

<explicit-route>—Explicit Route Object (ERO).

<hold-priority>—Hold priority determines whether a session can be preempted by another session. Range is 0 to 7.

<hoplimit>—Maximum number of hops that can be traversed.

<layer2-connection>—Layer 2 connection using the LSP path.

<name>—No documentation is available yet.

<no-decrement-ttl>—TTL.

<oam-state>—OAM state information.

<optimize-timer>—Frequency of reoptimization operation for LSPs that are already set up. It is useful only when CSPF is enabled.

<path-active>—Whether the path is active or not.

<path-adaptive>—During reroute, the bandwidth on links shared by the old and new paths is not double-counted. SE-style reservation is used to assist in smooth transition during rerouting.

<path-available-bandwidth>—Available bandwidth on an LSP path.

<path-history>—Log over time of LSP path-related events.

<path-no-recordroute>—LSP does not actively record routes in the path.

<path-soft-preemption-pending>—Soft preemption pending for this path.

<path-state>—State of the MPLS path.

<per-class-bandwidth-heading>—No documentation is available yet.

<preference>—Preference value configured with the preference statement. The default preference value is 170.

<received-rro>—RRO returned by the signaling protocol.

<retry-limit>—Maximum number of times the ingress tries to establish the primary path. It is reset each time primary path is created successfully.

<retry-timer>—Amount of time the ingress router waits between attempts to establish primary path.

<setup-priority>—Setup priority determines the ability of a session to preempt existing session. Range is 0 to 7.

<smart-optimize-timer>—Path optimization interval after a link traversed by the path goes down.

<title>—No documentation is available yet.