Tag Elements Beginning with P > <pic> (configuration/chassis/fpc)

Usage

<configuration>
    <chassis>
        <fpc>
            <pic>
                <name>name</name> <!-- identifier -->
                <tunnel-services>...</tunnel-services>
                <adaptive-services>...</adaptive-services>
                <monitoring-services>...</monitoring-services>
                <framing>framing-choice</framing>
                <synchronization>...</synchronization>
                <vtmapping>vtmapping-choice</vtmapping>
                <no-concatenate/>
                <aggregate-ports/>
                <sparse-dlcis/>
                <q-pic-large-buffer>...</q-pic-large-buffer>
                <red-buffer-occupancy>...</red-buffer-occupancy>
                <traffic-manager>...</traffic-manager>
                <idle-cell-format>...</idle-cell-format>
                <atm-l2circuit-mode>...</atm-l2circuit-mode>
                <atm-cell-relay-accumulation/>
                <mlfr-uni-nni-bundles>mlfr-uni-nni-bundles</mlfr-uni-nni-bundles>
                <ct3>...</ct3>
                <ce1>...</ce1>
                <max-queues-per-interface>max-queues-per-interface-choice
                                    </max-queues-per-interface>
                <shdsl>...</shdsl>
                <ethernet>...</ethernet>
                <tunnel-queuing/>
                <port-mirror-instance>port-mirror-instance</port-mirror-instance>
                <port>...</port>
            </pic>
        </fpc>
    </chassis>
</configuration>

Description

Physical Interface Card number.

Contents

<adaptive-services>—Adaptive services configuration.

<aggregate-ports>—Aggregate multiple ports on a PIC as a single port.

<atm-cell-relay-accumulation>—Enable ATM cell-relay accumulation mode.

<atm-l2circuit-mode>—Enable ATM Layer 2 circuit transport mode.

<ce1>—CE1 NxDS0 PIC configuration.

<ct3>—CT3 NxDS0 PIC configuration.

<ethernet>—J-series Ethernet PIM mode configuration.

<framing>—Framing mode.

• e1—E1 mode.
• e3—E3 mode.
• sdh—SDH mode.
• sonet—SONET mode.
• t1—T1 mode.
• t3—T3 mode.

<idle-cell-format>—ATM idle cell configuration.

<max-queues-per-interface>—Maximum number of queues per interface on QOS-capable PIC.

• 4—Maximum 4 queues per interface.
• 8—Maximum 8 queues per interface.

<mlfr-uni-nni-bundles>—Number of multilink Frame Relay UNI NNI (FRF.16) bundles to allocate on PIC.

<monitoring-services>—Monitoring services configuration.

<name>—PIC slot number.

<no-concatenate>—Do not concatenate channels.

<port>—Port number.

<port-mirror-instance>—Associate a port mirroring instance with the PIC.

<q-pic-large-buffer>—Run in large delay buffer mode.

<red-buffer-occupancy>—Computation type for RED buffer occupancy.

<shdsl>—SHDSL chassis configuration.

<sparse-dlcis>—Run in sparse data-link connection identifier mode.

<synchronization>—PIC synchronization source.

<traffic-manager>—Configure traffic manager attributes.

<tunnel-queuing>—Enable queueing for GRE/IPIP tunnels.

<tunnel-services>—Tunnel services configuration.

<vtmapping>—Virtual tunnel mapping mode.

• itu-t—ITU-T mode.
• klm—KLM mode.