Tag Elements Beginning with M > <mlfr-uni-nni-bundle-options> (configuration/interfaces/
interface)

Usage

<configuration>
    <interfaces>
        <interface>
            <mlfr-uni-nni-bundle-options>
                <cisco-interoperability>...</cisco-interoperability>
                <mrru>bytes</mrru>
                <yellow-differential-delay>milliseconds</yellow-differential-delay>
                <red-differential-delay>milliseconds</red-differential-delay>
                <action-red-differential-delay>action-red-differential-delay-choice
                                    </action-red-differential-delay>
                <fragment-threshold>bytes</fragment-threshold>
                <drop-timeout>milliseconds</drop-timeout>
                <link-layer-overhead>link-layer-overhead</link-layer-overhead>
                <lmi-type>lmi-type-choice</lmi-type>
                <minimum-links>minimum-links</minimum-links>
                <hello-timer>hello-timer</hello-timer>
                <acknowledge-timer>acknowledge-timer</acknowledge-timer>
                <acknowledge-retries>acknowledge-retries</acknowledge-retries>
                <n391>n391</n391>
                <n392>n392</n392>
                <n393>n393</n393>
                <t391>t391</t391>
                <t392>t392</t392>
            </mlfr-uni-nni-bundle-options>
        </interface>
    </interfaces>
</configuration>

Description

Multilink Frame Relay UNI NNI (FRF.16) management settings.

Contents

<acknowledge-retries>—LIP ack retry times.

<acknowledge-timer>—LIP ack timer.

<action-red-differential-delay>—Type of actions when differential delay exceeds red limit.

• disable-tx—Disable transfer of bundle link when exceeding red limit.
• remove-link—Remove bundle link from service when exceeding red limit.

<cisco-interoperability>—FRF.16 Cisco interoperability settings.

<drop-timeout>—Drop timeout.

<fragment-threshold>—Fragmentation threshold.

<hello-timer>—LIP hello timer.

<link-layer-overhead>—Link layer bit stuffing overhead (0.0 .. 50.0 percent).

<lmi-type>—Specify the multilink Frame Relay UNI NNI LMI type.

• ansi—Use ANSI Annex D LMI.
• itu—Use ITU Q933a Annex A LMI.

<minimum-links>—Minimum number of links to sustain the bundle.

<mrru>—Maximum received reconstructed unit.

<n391>—Multilink Frame Relay UNI NNI full status polling counter.

<n392>—Multilink Frame Relay UNI NNI LMI error threshold.

<n393>—Multilink Frame Relay UNI NNI LMI monitored event count.

<red-differential-delay>—Red differential delay among bundle links to take action.

<t391>—Multilink Frame Relay UNI NNI link integrity verify polling timer.

<t392>—Multilink Frame Relay UNI NNI polling verification timer.

<yellow-differential-delay>—Yellow differential delay among bundle links to give warning.