Tag Elements Beginning with I > <isis> (configuration/protocols)

Usage

<configuration>
    <protocols>
        <isis>
            <disable/>
            <traceoptions>...</traceoptions>
            <export>...</export>
            <reference-bandwidth>reference-bandwidth</reference-bandwidth>
            <lsp-lifetime>seconds</lsp-lifetime>
            <loose-authentication-check/>
            <max-areas>max-areas</max-areas>
            <no-authentication-check/>
            <no-ipv4-routing/>
            <no-ipv6-routing/>
            <clns-routing/>
            <no-adjacency-holddown/>
            <ignore-attached-bit/>
            <rib-group>...</rib-group>
            <spf-options>...</spf-options>
            <topologies>...</topologies>
            <overload>...</overload>
            <traffic-engineering>...</traffic-engineering>
            <graceful-restart>...</graceful-restart>
            <level>...</level>
            <interface>...</interface>
            <label-switched-path>...</label-switched-path>
        </isis>
    </protocols>
</configuration>

Description

IS-IS options.

Contents

<clns-routing>—Enable CLNS routing.

<disable>—Disable IS-IS.

<export>—Export policy.

<graceful-restart>—IS-IS graceful restart options.

<ignore-attached-bit>—Ignore the attached bit in Level 1 LSPs.

<interface>—Interface configuration.

<label-switched-path>—Configuration for advertisement of a label-switched path.

<level>—Configure global level attributes.

<loose-authentication-check>—Verify authentication only if PDU has authentication TLV.

<lsp-lifetime>—Lifetime of LSPs.

<max-areas>—Maximum number of advertised Areas.

<no-adjacency-holddown>—Disable adjacency hold down.

<no-authentication-check>—Disable authentication checking.

<no-ipv4-routing>—Disable IPv4 routing.

<no-ipv6-routing>—Disable IPv6 routing.

<overload>—Set the overload bit (no transit traffic).

<reference-bandwidth>—Bandwidth for calculating metric defaults.

<rib-group>—Routing table group for importing IS-IS routes.

<spf-options>—Configure SPF attributes.

<topologies>—Enable topologies.

<traceoptions>—Trace options for IS-IS.

<traffic-engineering>—Configure traffic engineering attributes.