Usage
<configuration><logical-systems><protocols><dot1x><authenticator><interface><name>name</name> <!-- identifier --><disable/><supplicant>supplicant-choice</supplicant><retries>retries</retries><quiet-period>seconds</quiet-period><transmit-period>seconds</transmit-period><no-reauthentication/><reauthentication>seconds</reauthentication><supplicant-timeout>seconds</supplicant-timeout><server-timeout>seconds</server-timeout><maximum-requests>maximum-requests</maximum-requests><guest-vlan>guest-vlan</guest-vlan></interface></authenticator></dot1x></protocols></logical-systems>
</configuration>Description
802.1X interface specific options.
Contents
<disable>—Disable 802.1X on this interface.
<guest-vlan>—VLAN name or 802.1q tag for unauthenticated or non-responsive hosts.
<maximum-requests>—Number of EAPOL RequestIDs to send before timing out.
<name>—No documentation is available yet.
<no-reauthentication>—Disable reauthentication.
<quiet-period>—Time to wait after an authentication failure.
<reauthentication>—Reauthentication interval.
<retries>—Number of retries after which port is placed into wait state.
<server-timeout>—Authentication server timeout interval.
<supplicant>—Set supplicant mode for this interface.
multiple—Allow multiple clients; authenticate each individually.single—Allow multiple clients; authenticate first client only.single-secure—Allow and authenticate only a single client.
<supplicant-timeout>—Time to wait for a client response.
<transmit-period>—Interval before retransmitting initial EAPOL PDUs.