Usage
<configuration><dynamic-profiles><interfaces><interface><ds0-options><loopback>loopback-choice</loopback><byte-encoding>byte-encoding-choice</byte-encoding><invert-data/><fcs>fcs-choice</fcs><idle-cycle-flag>idle-cycle-flag-choice</idle-cycle-flag><start-end-flag>start-end-flag-choice</start-end-flag><bert-algorithm>bert-algorithm-choice</bert-algorithm><bert-error-rate>bert-error-rate</bert-error-rate><bert-period>seconds</bert-period></ds0-options></interface></interfaces></dynamic-profiles>
</configuration>Description
DS-0 interface-specific options.
Contents
<bert-algorithm>—Set BERT algorithm.
all-ones-repeating—Repeating one bits.all-zeros-repeating—Repeating zero bits.alternating-double-ones-zeros—Alternating pairs of ones and zeros.alternating-ones-zeros—Alternating ones and zeros.pseudo-2e11-o152—Pattern is 2^11 -1 (per O.152 standard).pseudo-2e15-o151—Pattern is 2^15 - 1 (per O.151 standard).pseudo-2e20-o151—Pattern is 2^20 - 1 (per O.151 standard).pseudo-2e20-o153—Pattern is 2^20 - 1 (per O.153 standard).repeating-1-in-16—1 bit in 16 is set.repeating-1-in-4—1 bit in 4 is set.repeating-1-in-8—1 bit in 8 is set.repeating-3-in-24—3 bits in 24 are set.
<bert-error-rate>—Bit error rate (10^-n for n > 0, and zero for n = 0).
<bert-period>—Length of BERT test.
<byte-encoding>—Byte encoding.