[Contents] [Prev] [Next] [Index] [Report an Error]

Objectives

This guide contains instructions for installing and completing the initial configuration of a WXC Integrated Services Module (also known as WXC ISM 200) in a J-series Services Router running JUNOS software with enhanced services.

Note: This manual documents Release 9.1 of JUNOS software with enhanced services. For additional information—either corrections to or information that might have been omitted from this manual—see the JUNOS Software with Enhanced Services Release Notes at http://www.juniper.net.

Router operations are controlled by JUNOS software with enhanced services. You direct the software through either a Web browser or a command-line interface (CLI) to perform the tasks shown in Table 1.

You use the JUNOS CLI or the J-Web interface to perform the initial configuration of the WXC Integrated Services Module.

For an annotated list of documentation, see JUNOS Software Documentation for J-series Services Routers and SRX-series Services Gateways. All documents are available at http://www.juniper.net/techpubs/.

Table 1: Capabilities of J-series User Interfaces

User Interface	WXC Integrated Services Module Tasks
J-Web graphical browser interface	Initial configuration. Launching the WXOS Web interface. Select Configuration>Quick Configuration>WAN Acceleration>Manage.
JUNOS CLI	Initial configuration. Basic monitoring.
WXOS Web interface	Configuring WAN acceleration features. The WXOS Web interface is part of the J-Web interface, launched in a separate browser window for configuring WAN acceleration.
WXOS CLI	Configuring advanced settings unavailable in the Web interface.

[Contents] [Prev] [Next] [Index] [Report an Error]