[Contents] [Prev] [Next] [Index] [Report an Error]

Using NAT and the H.323 ALG to Enable Outgoing Calls

In this example, the devices in the external zone include the endpoint host (10.1.1.5) and the gatekeeper (10.1.1.25). IP_Phone2 (2.2.2.5) is in Zone2. You configure the J-series device to allow traffic between the endpoint host IP_Phone1 and the gatekeeper in the external zone and the endpoint host IP_Phone2 in the internal zone.

Before You Begin
For background information, read Understanding the H.323 ALG.

When the J-series device uses NAT, a gatekeeper or endpoint device in the external zone has a private address, and when it is in the internal zone, it has a public address. See Figure 112.

Figure 112: Network Address Translation—Outgoing Calls

Image g030626.gif

You can use either J-Web or the CLI configuration editor to enable outgoing calls.

This topic covers:

CLI Configuration
Related Topics

[Contents] [Prev] [Next] [Index] [Report an Error]