J-Web Configuration

To set a schedule that allows a policy to be used for packet match checks using the J-Web configuration editor:

1. Select Configuration>View and Edit>Edit Configuration.

   The Configuration page appears.

2. Next to Schedulers, click Configure or Edit.
3. Next to Scheduler, click Add new entry.
4. In the Scheduler name box, type Sch1.
5. Next to the Start Date box, click Add new entry.
6. In the Start date box, type 2007-10-01.08:00.
7. In the Stop date box, type 2008-04-01.21:00.
8. Specify the days when the policy cannot be used for packet matches:
   1. To exclude Saturdays from the schedule, next to Saturday, click Configure.
   2. From the Daily Type list, select Exclude and click OK.
   3. To exclude Sundays from the schedule, next to Sunday, click Configure.
   4. From the Daily Type list, select Exclude and click OK.

To associate the schedule with the policy, allowing access during regular work hours:

1. Select Configuration>View and Edit>Edit Configuration.

   The Configuration page appears.

2. Next to Policies, select the check box and click Configure or Edit.
3. In the From zone name box, type green.
4. In the To zone name box, type red.
5. In the Policy name box, type abc.
6. In the Scheduler name box, type sch1 and click OK.

To set schedulers that allow associated policies to check for packet matches from noon to 6 PM on Saturdays and Sundays:

1. Select Configuration>View and Edit>Edit Configuration.

   The Configuration page appears.

2. In the Scheduler name box, type scheduler SatHrs.
3. Next to Saturday, click Configure.
4. From the Daily type list, select Start time.
5. Next to Start time, click Add new entry.
6. In the Start time value box, type 12:00:00.
7. In the Stop time box, type 18:00:00 and click OK.
8. To set the scheduler that allow associated policies to check for packet matches from noon to 6 PM on Sundays, repeat Step 1 through Step 7 and click OK.

To bind these schedules with the policy, allowing access during the specified weekend hours:

1. Select Configuration>View and Edit>Edit Configuration.

   The Configuration page appears.

2. Next to Policies, select the check box and click Configure or Edit.
3. In the From zone name box, type green.
4. In the To zone name box, type red.
5. In the Policy name box, type abc.
6. To bind these schedules to the policy during Saturdays, in the Scheduler name box, type SatHrs and click OK.
7. To bind these schedules to the policy during Sundays, in the Scheduler name box, type SunHrs and click OK.
8. If you are finished configuring the device, commit the configuration.
9. To check the configuration, see Verifying Scheduled Policies.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.