J-Web Configuration

To configure the J-series device to allow unknown H.323 message types in both route and NAT modes using the J-Web configuration editor:

Select Configuration > View and Edit > Edit Configuration.
The Configuration page appears.
Next to Security, click Configure or Edit.
Next to ALG, click Configure or Edit.
Next to H323, click Configure or Edit.
Next to Application screen, click Configure or Edit.
Next to Unknown message, click Configure or Edit.
Select one of the following boxes:
- To allow unknown message types in NAT mode, select the Permit nat applied check box and click OK.
- To allow unknown message types in route mode, select the Permit route check box and click OK.
If you are finished configuring the J-series device, commit the configuration.
To check the configuration, see Verifying the H.323 Configuration.