J-Web Configuration

To configure the ABC zone to allow use of all the supported protocols for host inbound traffic using the J-Web configuration editor:

1. Select Configuration > View and Edit> Edit Configuration.

   The Configuration page appears.

2. Next to Security, click Configure or Edit.
3. Next to Zones, click Configure or Edit.
4. Next to Security zone, click Add new entry.
5. In the Name box, type ABC and click OK.

To configure an interface for the created security zone, corresponding to the security zone name ABC and click Edit.

1. Next to Interfaces, click Add new entry.
2. In the Interface unit box, type ge-0/0/1.3 and click OK.
3. Next to Host inbound traffic, click Configure or Edit.
4. Next to System services, click Add new entry.
5. From the Service name list, select ping and click OK.
6. Next to System services, click Add new entry.
7. From the Service name list, select ssh and click OK.
8. Next to System services, click Add new entry.
9. From the Service name list, select traceroute and click OK.
10. Next to Protocols, click Add new entry.
11. In the Protocol name box, type ospf and click OK.
12. If you are finished configuring the device, commit the configuration.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.