[Contents] [Prev] [Next] [Index] [Report an Error]

Example: Show Security Traceoptions Output

The following CLI show security traceoptions command is used as follows:



user@host # show security traceoptions file usp_trace

user@host # show security traceoptions flag all

user@host # show security traceoptions rate-limit 888

The output is as follows:



Apr 11 16:06:42 21:13:15.750395:CID-906489336:FPC-01:PIC-01:THREAD_ID-01:PFE:now
update 0x3607edf8df8in 0x3607e8d0 
Apr 11 16:06:42 21:13:15.874058:CID-1529687608:FPC-01:PIC-01:THREAD_ID-01:CTRL:Enter
Function[util_ssam_handler]  
Apr 11 16:06:42 21:13:15.874485:CID-00:FPC-01:PIC-01:THREAD_ID-01:CTRL:default1:
Rate limit changed to 888
Apr 11 16:06:42 21:13:15.874538:CID-00:FPC-01:PIC-01:THREAD_ID-01:CTRL:default1:
Destination ID set to 1
Apr 11 16:06:42 21:13:15.874651:CID-00:FPC-01:PIC-01:THREAD_ID-01:CTRL:default2:
Rate limit changed to 888
Apr 11 16:06:42 21:13:15.874832:CID-00:FPC-01:PIC-01:THREAD_ID-01:CTRL:default2:
Destination ID set to 1
Apr 11 16:06:42 21:13:15.874942:CID-00:FPC-01:PIC-01:THREAD_ID-01:CTRL:default3:
Rate limit changed to 888
Apr 11 16:06:42 21:13:15.874997:CID-00:FPC-01:PIC-01:THREAD_ID-01:CTRL:default3:
Destination ID set to 1

[Contents] [Prev] [Next] [Index] [Report an Error]