Configuring Source NAT—Quick Configuration

You can use J-Web Quick Configuration to quickly configure source NAT.

Before You Begin
For background information, read Configuring Host Inbound Traffic Understanding NAT Interface Source Pools Example: Configuring Source NAT on J-series Services Routers

Before You Begin

For background information, read

Figure 60 shows the Quick Configuration for Source NAT page.

Figure 60: Quick Configuration Page for Source NAT

Image QC_src_NAT.gif

To configure source NAT with Quick Configuration:

Select Configuration > Quick Configuration > Firewall/NAT > Source NAT. See Figure 60.
Fill in the options as shown in Table 53.
Click one of the following buttons:
- To apply the configuration and stay on the Quick Configuration page, click Apply.
- To apply the configuration and return to the main Configuration page, click OK.
- To cancel your entries and return to the main page, click Cancel.

Table 53: Source NAT Configuration Options

Field	Function	Action
Source NAT
Address Persistent	Ensures that the router assigns the same IP address from a source pool to a host for multiple concurrent sessions.	Enable Address Persistent.
Pool Utilization Alarm	Turns on pool utilization alarm by configuring alarm thresholds.	Raise Threshold—Enter a number between 50-100 to raise the threshold for the pool utilization alarm. Clear Threshold—Enter a number between 40-100 to clear the threshold for the pool utilization alarm.
Pool Set
Add Pool Sets	Defines one or more source pool sets (group of source pools).	Click Add.
Pool Set Name	Descriptive name for the pool set.	Type a name for the pool set.
Pool	Name of the pools to be included in the address pool set.	Select the pools to be added and click Add.