Configuring Signaling Protocols for Traffic Engineering

[Contents] [Prev] [Next] [Index] [Report an Error]

Signaling protocols are used within a Multiprotocol Label Switching (MPLS) environment to establish label-switched paths (LSPs) for traffic across a transit network.

You can use either the J-Web configuration editor or CLI configuration editor to configure signaling protocols.

This chapter contains the following topics. For more information about MPLS traffic engineering, see the JUNOS MPLS Applications Configuration Guide.

Signaling Protocol Overview
Before You Begin
Configuring LDP and RSVP with a Configuration Editor
Verifying an MPLS Configuration

[Contents] [Prev] [Next] [Index] [Report an Error]