- show security nat destination
pool
- <
pool-name >
- all
Command introduced in Release 9.2 of JUNOS software.
Display information about the specified Network Address Translation (NAT) destination address pool.
This command is supported on SRX-series devices.
pool-name —Name of the destination address pool.
all—Display information about all the destination NAT address pool.
view
pool (Destination NAT Services Gateway)
Table 69 lists the output fields for the show security nat destination pool command. Output fields are listed in the approximate order in which they appear.
Table 69: show security nat destination pool Output Fields
user@host> show
security nat destination pool dst-nat-pool1
Pool name: dst-nat-pool1
Pool id: 1
Routing instance: ri-green
Total address: 1
Address available: 1
Address range Port
10.1.1.150-10.1.1.150
user@host> show
security nat destination pool all
Total destination nat pool number: 3
Pool name: dst-nat-pool1
Pool id: 1
Routing instance: ri-green
Total address: 1
Address available: 1
Address range Port
10.1.1.150-10.1.1.150
Pool name: dst-nat-pool2
Pool id: 2
Routing instance: ri-green
Total address: 21
Address available: 10
Address range Port
10.1.1.160-10.1.1.180
Pool name: dst-nat-pool3
Pool id: 3
Routing instance: ri-green
Total address: 1
Address available: 1
Address range Port
10.1.1.190-10.1.1.190 8080