[Contents] [Prev] [Next] [Index] [Report an Error]

Verifying the PPPoE Version

Purpose

Verify the version information of the PPPoE protocol configured on the Services Router interfaces.

Action

From the CLI, enter the show pppoe version command.

user@host> show pppoe version

Point-to-Point Protocol Over Ethernet, version 1. rfc2516
   PPPoE protocol               = Enabled
   Maximum Sessions             = 256
   PADI resend timeout          = 2 seconds
   PADR resend timeout          = 16 seconds
   Max resend timeout           = 64 seconds
   Max Configured AC timeout    = 4 seconds

Meaning

The output shows PPPoE protocol information. Verify the following information:

The correct version of the PPPoE protocol is configured on the interface.
Under PPPoE protocol, the PPPoE protocol is enabled.

Related Topics

For a complete description of show pppoe version output, see the JUNOS Interfaces Command Reference.

[Contents] [Prev] [Next] [Index] [Report an Error]