Clearing an MGC List

In the following example, a TGM550 is installed in slot 2 of the router.

To remove all the IP addresses from the MGC list, with the JUNOS CLI:

1. Enter operational mode on the CLI.
2. Enter the clear tgm fpc slot media-gateway-controller command:
   user@host> clear tgm fpc 2 media-gateway-controller

   The clear command removes all the MGC IP addresses. You cannot clear the IP address of a single MGC with this command.

3. Add one or more new MGC IP addresses. (See Configuring an MGC List and Adding Addresses.)

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.